A/V Insert

3020B Series

---

The A/V patch panels complement A/V adapter inserts and offer a flexible patching solution. The A/V adapter inserts are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

---

Screw Terminal Type 90° USB 2.0 Coupler

310USB1N

---

USB-Screw Terminal extender module provide a economical and perfect solution for boosting up. With one low cost Cat 5e or Cat 6 cable, users can readily extend connecting computer peripherals to a computer workstation. The screw design is also convenient to integrate extender module with LAN cable without any punch down tool, and use it easily after simply snapping it in the faceplates. Made in Taiwan, U.S. TAA Compliant

---

Horizontal Type 180° USB 2.0 / 3.0 Coupler

310USBN/ 210USBN

---

USB Coupler provide a perfect solution for connecting computer peripherals to a computer workstation, which require just a plug 'n play patch cord connection. These couplers provide a clean, aesthetic look, and integrating all applications into one space. There are many items of couplers could be chosen. Then use it easily after simply snapping it in the faceplates, frames, or multimedia panels. Made in Taiwan, U.S. TAA Compliant

---

90° USB 3.0

210USBN

---

USB Coupler provides a perfect solution for connecting computer peripherals to a computer workstation, which require just a plug 'n play patch cord connection. These couplers provide a clean, aesthetic look, integrating all applications into one space. There are many items of couplers could be chosen. Then use it easily after simply snapping it in the faceplates, frames, or multimedia panels. Made in Taiwan, U.S. TAA Compliant

---

90° TRS 3.5mm

210MS01N

---

Couplers provide a perfect solution for connecting player to the display or computer peripherals to a computer workstation, which require just a plug 'n play patch cord connection. These couplers provide a clean, aesthetic look, integrating all applications into one space. There are many items of couplers could be chosen. Then use it easily after simply snapping it in the faceplates, frames, or multimedia panels. Made in Taiwan, U.S. TAA Compliant

---

Category 6

SP24MHQ6

---

0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offer a flexible patching solution. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Category 5e

SP24MHQ5e

---

0.5U 24-Port Unshielded Keystone jack snap-in type patch panel complements keystone jacks and offer a flexible patching solution. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

8-Pack Standard

SP24VM

---

1U 24-Port Unshielded Keystone jack snap-in type multimedia panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

Standard Type

SP24N5M

---

1U 24-Port shielded snap-in type multimedia panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises. Made in Taiwan, U.S. TAA Compliant

---

High-Density

SP482M

---

48-port in 1U will save a lot of precious rack space in Data Center. SP482 offers you the possibilities to build any solution as desired. If 48-port Component-Rated Keystone LKVAS is needed, simply terminate each jack then load it on to the panel. If Feed-Through connection is more preferable, you can have 48-port Keystone Coupler KICS pre-configured. It’s really up to you to make up your own combination. The wire management is made with pivot hinges at each side which would allow you to fold the hangers so as to save the shipping volume.

---

Angled Type

SP24AHS

---

1U 24-Port Shielded Angled Snap-In Type Discrete Panel (Empty / Unloaded Patch Panel) complements keystone jacks and offer a flexible patching solution. The keystone jacks are ordered separately and quickly snap into blank patch panels. This modular capability allows custom configuration of panels to suit a variety of applications. Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

---

EZ Grabber

Cat 6A 26AWG

---

In densely populated racks or cabinets filled with patch cords, performing routine maintenance like moves, adds, and changes (MACs) can be a challenge. That’s where our EZ-Grabber solution steps in. The boot features a resilient release mechanism, allowing disconnection directly from behind using the included grabber. This eliminates the need for additional clearance, streamlining maintenance in tight spaces. Delicately assembled with a specialized load-bar, the design minimizes untwisted sections to maintain precise impedance matching and ensure signal integrity. The Fully-shielded plug is constructed with S/FTP 26AWG stranded cable, ensuring reliable shielding and excellent flexibility. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6A Patch Cord Test Limits, guaranteeing component-rated performance.

---

EZ Tracker

Cat 6 24AWG

---

The EZ-Tracker Patch Cord offers a simple solution for identifying the corresponding port in dense setups where hundreds of cords are tightly bundled. With a single press, the port at the remote end illuminates, instantly guiding you to its location and removing any guesswork. The LED lights on both ends can toggle over 1,000 times, with a battery life exceeding 500 hours. Constructed with U/UTP 24AWG bare copper and 0.97mm insulated stranded conductors, it ensures reliable performance over full channel lengths up to 100 meters (90-meter link and 10-meter patch cord) with a 20% de-rating factor. Each patch cord undergoes 100% in-house testing with the FLUKE DSX-8000 to meet Cat 6 Patch Cord Test Limits, ensuring guaranteed component-rated performance.

---

EZ Grabber

Cat 6 26AWG

---

In densely populated racks or cabinets filled with patch cords, performing routine maintenance like moves, adds, and changes (MACs) can be a challenge. That’s where our EZ-Grabber solution steps in. The boot features a resilient release mechanism, allowing disconnection directly from behind using the included grabber. This eliminates the need for additional clearance, streamlining maintenance in tight spaces. Delicately assembled with a specialized load-bar, the design minimizes untwisted sections to maintain precise impedance matching and ensure signal integrity. The Fully-shielded plug is constructed with S/FTP 26AWG stranded cable, ensuring reliable shielding and excellent flexibility. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6 Patch Cord Test Limits, guaranteeing component-rated performance.

---

EZ Punch+Strip

3013APTNQ1YL

---

Punch and strip twisted pair cable with our EZ Punch+Strip tool. Feature four cavities accomodating cable outer diameter (O.D.) ranging from ∅5mm to ∅6.2mm. Simplify your cable termination process with precision and ease using this 2-in-1 solution.

---

BNC

BNC to BNC

---

The BNC coupler offers waterproof protection, making it suitable for military applications and a variety of radio frequency electronic devices. It connects BNC patch cords to support the BNC interface, which was used in early computer networking systems like the IBM PC Network and 10BASE-2, while providing dependable IP-68 rated protection in harsh or outdoor environments. Equipped with a protective cap attached by a chain, the coupler ensures the internal components remain shielded from tough conditions when not in use, enhancing its durability.

---

EtheIEFA0-C

4-Port

---

The waterproof faceplate, made from high-quality SUS430 stainless steel, offers a robust and durable solution for industrial-grade applications. With a minimum IP-44 rating, it provides reliable protection against dust and water spray, while also resisting oil exposure commonly found in environments with heavy machinery. Equipped with a rear gasket, the faceplate effectively seals out contaminants, ensuring long-term durability and performance even in challenging conditions. The 83.1mm screw hole spacing is compatible with most American wall brackets. Its outer dimensions, 116x114.6mm, ensure coverage of traditional wall cutouts, even if they are rough or uneven.

---

Mount Box (25.2φ)

For RJ45 (IECA/IEKA)

---

The Mounting Box IEMA0 is designed for seamless IP-68 rated connections between jacks and cords, featuring two knockout holes on the cover. If you only need one port, you can easily leave the second hole intact. Each knockout hole has a 25.2mm diameter, perfectly fitting our RJ45 Keystone Jacks (IEKA0) or Couplers (IECA). The side panel offers additional flexibility with two smaller holes for M16 cable glands, commonly found in stores, and one larger hole for an M32 conduit gland. You can remove the knockouts based on your specific requirements, making installation straightforward.

---

Shuttered 45° 1-Port

SIP30AIN1

---

SIP30AIN1 is a full-size 45 x 45mm Sub-Insert (SIPs) built for a single keystone jack, making it a clean one-port solution when you don’t need a dual-port setup. Just like other SIPs in HCI’s Continental Euromod lineup, it supports all categories of keystone jacks with latch heights between 19.20 mm and 19.40 mm, and fits seamlessly into our 625B66G Continental Frame. The 45-degree angled design minimizes patch cord protrusion at the front while creating more clearance at the back—ideal for shallow wall spaces. A spring-loaded shutter keeps the port protected when not in use, and both blue (Data) and green (Voice) icons are included - just snap on the one you need. Made from UL94V-0 flame-retardant ABS plastic, the standard color is office white (close to RAL 9016). Custom colors are available for orders of 5,000 units or more.

---

LC to MPO Panel

SM & MM (144-Fiber)

---

The MPO to LC Patch Panel offers a simple and efficient solution for connecting MPO trunk cables to multiple LC breakout connections. Inside the panel, each harness pack features one MPO male (pinned) to three LC Quad adapters, totaling 12 packs that distribute 144 fibers from just 12 MPO cables. The default configuration uses straight-through polarity, with reversed wiring available upon request. Fiber options include OS2, OM3, OM4, and OM5, each paired with its corresponding adapter housing color for easy identification.

---

2xMPO-12 Migrate

to 3xMPO-12(8-F ea.)

---

The 2×MPO-12 to 3×MPO-12 LGX cassette fits standard LGX cutouts and provides a flexible MPO migration solution. Two MPO-12 inputs at the rear are redistributed to three MPO-12 outputs, each carrying 8 fibers, enabling smooth transition between legacy and upgraded MPO cabling while keeping the cabling organized. Available in SM OS2 G.657.A and OM3/OM4 bend-insensitive fiber options. Reversed wiring (Method B) is standard, with custom wiring available upon request.

---

Solutions

---

UTP - TIA Cat 6A Cabling Solution

---

STP - TIA Cat 6A Cabling Solution

---