1~12 Port Surface Box

SMB Series

---

The surface box provides flexible surface mounting of 1-, 2-, 4- or 12-port and accommodate Keystone Jacks without shutter. The unit comes with mounting screws and double-sided adhesive for quick installation. Additional magnets are available upon request.

---

3013BUS-15C

---

For KRONE IDC

3013AMTH02

---

The interchangeable Punch Down Tool (Impact / Non-Impact) efficiently terminates patch panels using its unremovable Krone and 110 type blades. It seats wires securely into terminal blocks and trims excess length in one go.

---

For KVA Series

3013AFT3GBLBK

---

Terminate KVA Series Keystone Jacks with consistently high-quality by using our custom-made EZ-Termination tool. Seats and trims excess insulated conductors in one go with one hand.

---

For KVE Series

3013AFT3LBLBK

---

Terminate KVE & KVB Series Keystone Jacks with consistently high-quality by using our custom-made EZ-Termination tool. Seats and trims excess insulated conductors in one go with one hand.

---

For 30N Series

3013AFT3IBL

---

Terminate 30N Series Keystone Jacks with consistently high-quality by using our custom-made EZ-Termination tool. Seats and trims excess insulated conductors in one go with one hand.

---

For KHA Series

3013AFT4GPN

---

Terminate KHA Series Keystone Jacks with consistently high-quality by using our custom-made EZ-Termination tool. Seats and trims excess insulated conductors in one go with one hand.

---

For FQJS Series

3013AFT4FPN

---

Terminate FQJS Series Keystone Jacks with consistently high-quality by using our custom-made EZ-Termination tool. Seats and trims excess insulated conductors in one go with one hand.

---

For Toolless Jacks & Field Plugs

3013APCT01GNYL

---

The Parallel Crimping Pliers offer a convenient, efficient, and safe way to crimp toolless RJ45 Keystone Jacks, Field Termination Plugs, and other similar connectors onto cables. They help installers ensure the IDCs are securely connected to the wires to achieve excellent quality. These Parallel Crimping Pliers are welcomed by professional installers who install large numbers of tool-less jacks and plugs in one project. - Easy-to-use: Simply squeeze the handles to clamp the wires and connectors tightly together - Dual Jaws Design: Crimp Keystone Jacks and Field Term. Plug with one tool - Comes with Lock: Keep the plier closed for easy storage

---

For 88TK

3013APCT02x-1SB

---

This Parallel Crimping Plier is custom-designed to crimp our 88TK series Field Termination Plug. It is designed to be portable with its lightweight and compact size. This tool can be customized with an optional belt clip for convenient carrying and a cable stripper for added utility.

---

For 88TSK

3013APCT02x-2SB

---

This Parallel Crimping Plier is custom-designed to crimp our 88TSK series Field Termination Plug. It is designed to be portable with its lightweight and compact size. This tool can be customized with an optional belt clip for convenient carrying and a cable stripper for added utility.

---

For KVB

3013APCT02x-3SB

---

This Parallel Crimping Plier is custom-designed to crimp our KVB series Keystone Jack. It is designed to be portable with its lightweight and compact size. This tool can be customized with an optional belt clip for convenient carrying and a cable stripper for added utility.

---

For LKVAS

3013APCT02x-4SB

---

This Parallel Crimping Plier is custom-designed to crimp our LKVAS series Keystone Jack. It is designed to be portable with its lightweight and compact size. This tool can be customized with an optional belt clip for convenient carrying and a cable stripper for added utility.

---

Punch Stand

3013AFT

---

Punch keystone jacks in a safer way with our Punch Stand during termination. Crafted from high-impact ABS plastic, this handheld stand provides a solid base for termination and is specifically designed for use with our 180° / 90° punch down jacks and 110 Impact Tool. The ergonomic design ensures a firm grip and maximum comfort. Hold the jack securely in your palm, protecting yourself from cuts and save your walls from impact damage.

---

EZ Punch

3013APTNH02

---

Terminates keystones and patch panels with this handy non-impact punchdown tool. The 110 type blade end seats wires into terminal blocks and trims excess length in one go. Easy to carry around with the extreme compact size and lightweight.

---

Secured Lock for RJ45 Keystone Jack and Patch Panel

PDCL Series

---

Protect your ports from unauthorized use and keep them dust-free with our easy-to-use add-on from the PDCL series: the Security Lock for RJ45 ports.

---

ISO/IEC Category 6a

3013AKHA6AI

---

For Cat 6A, from 1MHz to 250MHz, ANSI/TIA 568.2-D and ISO/IEC-11801 shares the same limit but starts to vary from 250MHz to 500MHz. Any ISO Cat 6a Component-Rated jack that passes ISO Cat 6a NEXT limit will at the same time pass TIA Cat 6A NEXT limit with a higher margin. ISO Cat 6a beyond TIA Cat 6A – the stricter 3dB requirement approximately contributes 30% increase on performance at 500MHz. This also means more headroom to the entire installed cabling system in field. Made in Taiwan 3P Certified ISO/TIA Cat 6a Connecting Hardware 4PPoE Compliant US 9325117 B1 Patented

---

Category 6A

3013AKHA6A

---

ANSI/TIA-568.2-D clearly specifies that a jack should meet not only the INTERNAL CROSSTALK limits, but also ALIEN CROSSTALK requirements so as to satisfy Cat 6A connecting hardware standard. Please bear this in mind, when you choose Cat 6A “Component-Rated” jack, you’re choosing a jack together with specific mounting fixtures that really supports 10 Gigabit Ethernet without compromising the severity of external noises come from neighboring ports. Made in Taiwan ETL Certified Cat 6A Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9325117 B1 Patented

---

Category 6

3013AKHA6S

---

Considerations for running 802.3bz 5GBASE-T to support higher data rate of wireless AP would push the required bandwidths to 312MHz, well above the 250MHz specification of ANSI/TIA 568.2-D and ISO/IEC-11801 Category 6. HCI Super Cat 6 Component-Rated jacks go beyond extended bandwidth for up to 350MHz. It features Inductance-offset technique to reduce fringing field and to improve NEXT, FEXT and Return Loss. This technique is US 9325117 B1 patented. Made in Taiwan ETL Certified Cat 6 Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9325117 B1 Patented

---

Category 5e

3013AKHA5eS

---

HCI Super Cat 5e Component-Rated jacks are compatible to ANSI/TIA 568.2-D and ISO/IEC-11801 standards. Moreover, they are capable of going beyond extended frequencies to support 2.5G BASE-T. It features Inductance-offset technique to reduce fringing field and to improve NEXT, FEXT and Return Loss. This technique is US 9325117 B1 patented. Compact structure allows loading into 48-port in 1U high density patch panels and 6-port gang frames. Made in Taiwan ETL Certified Cat 5e Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9325117 B1 Patented

---

ISO/IEC Category 6a

3013AKVA6AI

---

For Cat 6A, from 1MHz to 250MHz, ANSI/TIA 568.2-D and ISO/IEC-11801 shares the same limit but starts to vary from 250MHz to 500MHz. Any ISO Cat 6a Component-Rated jack that passes ISO Cat 6a NEXT limit will at the same time pass TIA Cat 6A NEXT limit with a higher margin. ISO Cat 6a beyond TIA Cat 6A – the stricter 3dB requirement approximately contributes 30% increase on performance at 500MHz. This also means more headroom to the entire installed cabling system in field. Made in Taiwan ETL Certified ISO/TIA Cat 6a Component & Quarterly Tested 4PPoE Compliant US 9391405 B1 Patented

---

Category 6A

3013AKVA6A

---

ANSI/TIA-568.2-D clearly specifies that a jack should meet not only the INTERNAL CROSSTALK limits, but also ALIEN CROSSTALK requirements so as to satisfy Cat 6A connecting hardware standard. Please bear this in mind, when you choose Cat 6A “Component-Rated” jack, you’re choosing a jack together with specific mounting fixtures that really supports 10 Gigabit Ethernet without compromising the severity of external noises come from neighboring ports. Made in Taiwan ETL Certified Cat 6A Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9391405 B1 Patented

---

Category 6

3013AKVA6S

---

Considerations for running 802.3bz 5GBASE-T to support higher data rate of wireless AP would push the required bandwidths to 312MHz, well above the 250MHz specification of ANSI/TIA 568.2-D and ISO/IEC-11801 Category 6. HCI Super Cat 6 Component-Rated jacks go beyond extended bandwidth for up to 350MHz. It features Inductance-offset technique to reduce fringing field and to improve NEXT, FEXT and Return Loss. This technique is US 9391405 B1 patented. Made in Taiwan ETL Certified Cat 6 Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9391405 B1 Patented

---

Category 5e

3013AKVA5eS

---

HCI Super Cat 5e Component-Rated jacks are compatible to ANSI/TIA 568.2-D and ISO/IEC-11801 standards. Moreover, they are capable of going beyond extended frequencies to support 2.5G BASE-T. It features Inductance-offset technique to reduce fringing field and to improve NEXT, FEXT and Return Loss. This technique is US 9391405 B1 patented. Compact structure allows loading into 48-port in 1U high density patch panels and 6-port gang frames. Made in Taiwan ETL Certified Cat 5e Connecting Hardware & Quarterly Tested 4PPoE Compliant US 9391405 B1 Patented

---