-
TIA C6A Channel
3013ALQS6A
The 3013ALQS6A is an intuitive 180-degree tool-free Cat 6A keystone jack delivering reliable 10G Channel-Level performance. âș Robust Die-Cast EMI Shielding: Heavy-duty zinc-alloy housing completely encapsulates internal circuitry, blocking ambient noise and Alien Crosstalk to ensure clean 10GBASE-T signal delivery. Simplifies field preparation by allowing technicians to twist the screen braid into a pigtail that establishes direct contact with the die-cast body as the rear cover closes. âș Intuitive Tool-Free Termination: Features an ergonomic lever/cover closure mechanism that seats conductors cleanly and gas-tightly without requiring specialized impact or crimping tools.
-
Pivot-Angle
88TA6A0
Toolless : Crimping tool free. Do not have to maintain or prepare the crimping tool. Easy & Convenient to terminate the plug with cable. Angle Adjustable: Prevent the cable excess bending. It could be used in limited space environment. Mechanism Design: Reduce performance differences due to installation caused by different people.
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.âŠ5.5mm
The Pass-Through Cat 5e unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.âŠ5.5mm
The Pass-Through Cat 5e shielded modular plugs accept from 24 to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Pass-Through Cat 6 unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.95-1.05mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. âThe Snaglessâ allows easy pulling through crowded distribution frames or cable management trays. âThe Pass-Throughâ enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 1.05-1.15mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. âThe Snaglessâ allows easy pulling through crowded distribution frames or cable management trays. âThe Pass-Throughâ enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Pass-Through Cat 6 shielded modular plugs accept 24AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.95-1.05mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. âThe Snaglessâ allows easy pulling through crowded distribution frames or cable management trays. âThe Pass-Throughâ enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 1.05-1.15mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. âThe Snaglessâ allows easy pulling through crowded distribution frames or cable management trays. âThe Pass-Throughâ enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.âŠ6.5mm
The Pass-Through Cat 6A unshielded modular plugs accept from 24AWG to 26AWG stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, which is the secret to Cat 6A compliance. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application
-
Crimping Tool for Standard w/Hook
Works with 88S201KS plug series
Crimp RJ-45 8P plugs and ground collar at one press using this 007A8201 Crimping Tool. Compatible with STP Standard w/Hook plugs (88S201KS1B50 & 88S201KS2B50 series)
-
For 1.30-1.40mm Insulated Conductor
Cable Range: O.D.âŠ7.5mm
The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm. The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The â1357-up/2468-down loading barâ is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50uâ gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
Crimping Tool for Pass-Through Plugs
Works with HCI Pass-Through Plug Series
The 007A8401 Series Crimping Tool is custom-made for HCI 88U400G, 88S400E, 88U403E and 88S403C Plug Series. Just thread the wires through the end wall of the plug and cut them afterward. The tool terminates the contact blades with insulated conductors and cut off the excess wires flush at the same time without damaging the plug body. The tool is suitable for insulated conductors ranging from 0.85mm to 1.05mm solid and stranded wires. The cutting die offers more than 5000 times termination cycles. Two spare blades are included for easy replacement. It is made of carbon steel material with lightweight aluminum-alloyed handle that weighs 420 grams only. Easy to carry around.
-
Crimping Tool for Snagless Thru Plugs
Works with HCI Snagless Pass-Through Series
Crimp and cut HCI Snagless Pass-Through Plug Series (UTP plug: 88U51220AD52, 88U5122S1D52; STP plug: 88S51440AD52, 88S51430AD52) with this custom-made 007A8502 Plug Crimping Tool. Comes with dual cavity ground crimp to wrap STP plug's ground collar onto cable. The horizontal crimping design gives a relatively flat and consistent force to minimize uneven pressure or distortion for consistent and high-quality termination with its stable and straightforward crimping motion.
-
EZ Grabber
Cat 6 24AWG
In densely populated racks or cabinets filled with patch cords, performing routine maintenance can be a challenge. Our EZ-Grabber boot features a resilient release mechanism, allowing quick disconnection from behind with the included grabberâno extra clearance required. The crimping process carefully retains minimal untwisted length, ensuring precise impedance matching during cord assembly. Constructed with U/UTP 24AWG bare copper and 0.97mm insulated stranded conductors, it ensures reliable performance over full channel lengths up to 100 meters (90-meter link and 10-meter patch cord) with a 20% de-rating factor. Each patch cord is 100% in-house tested using the FLUKE DSX-8000 for Cat 6A Patch Cord Test Limits, guaranteeing component-rated performance.
-
Colored Ring (Short)
Cat 6 24AWG
Features detachable rings on the boot for quick and easy color coding, available in 8 standard colors, and can be changed with just a fingertip swap. Constructed with U/UTP 24AWG bare copper and 0.97mm insulated stranded conductors, it ensures reliable performance over full channel lengths up to 100 meters (90-meter link and 10-meter patch cord) with a 20% de-rating factor. The crimping process carefully retains minimal untwisted length, ensuring precise impedance matching during cord assembly. Each patch cord undergoes 100% in-house testing with the FLUKE DSX-8000 to meet Cat 6 Patch Cord Test Limits, ensuring guaranteed component-rated performance. The short boot design offers strain relief to prevent improper pulling, while also reducing the overall depth of the 'plug + boot' combination for better fit in tight spaces.
-
âCrimp
007A8H
Crimp 8P(RJ45) non pass-through modular plugs with 007A8H designed for precision. Comes with integrated cable stripper and cutter for cable preparation, compatible with cable outer diameter (O.D.) from Ă5.5 to Ă7.0. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
âCrimp
007A8H03
Crimp 4P/6P/8P/DEC modular plugs using our All-in-One Modular Plug Crimper designed for precision crimp. Easily switch between voice/data plugs and prepare your cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.) from Ă5.0 to Ă8.0. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
âCrimp/Thru
007A8M01
Crimp and trim 8P(RJ45)/6P(RJ12, RJ11) pass-through/non pass-through modular plugs, crimp strain latch, and wrap ground collars onto cable with a single tool. The 360° ground crimp in dual cavities provides secure and effective crimping for cable O.D. ranging from Ă6.5 to Ă8.5. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
âCrimp/Palm
007A8H04
Crimp 8P(RJ45) non pass-through modular plugs with this palm-size plug crimping tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.). The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
âCrimp/Palm/Thru
007A8H05
Crimp and trim 8P(RJ45) pass-through/non pass-through modular plugs with this palm-size plug crimping tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.). The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
For Toolless Jacks & Field Plugs
3013APCT01GNYL
The Parallel Crimping Pliers offer a convenient, efficient, and safe way to crimp toolless RJ45 Keystone Jacks, Field Termination Plugs, and other similar connectors onto cables. They help installers ensure the IDCs are securely connected to the wires to achieve excellent quality. These Parallel Crimping Pliers are welcomed by professional installers who install large numbers of tool-less jacks and plugs in one project. - Easy-to-use: Simply squeeze the handles to clamp the wires and connectors tightly together - Dual Jaws Design: Crimp Keystone Jacks and Field Term. Plug with one tool - Comes with Lock: Keep the plier closed for easy storage
-
For 88TK
3013APCT02x-1SB
This Parallel Crimping Plier is custom-designed to crimp our 88TK series Field Termination Plug. It is designed to be portable with its lightweight and compact size. This tool can be customized with an optional belt clip for convenient carrying and a cable stripper for added utility.
- Home Homepage
- This is HCI Company Profile
- Copper Products By Products
-
Copper Solutions By Cat. Cabling
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- Fiber Optics Fiber Connectivity
- IoT Solutions Remote / Cabled