88S403C0OC52

Cat 6A shielded modular plugs | TAA-Compliant & ISO/IEC-Aligned Cabling Products | HCI

Menu



Best Seller

For 1.30-1.40mm Insulated Conductor |88S403C0OC52 (Cable Range: O.D.≦7.5mm) – HCI

Build stable, high-speed networks with HCI structured cabling products. Our range—covering For 1.30-1.40mm Insulated Conductor, RJ45 connectors, modular plugs, patch panels, couplers, patch cords, cable-management tools, and installation accessories—helps installers deliver reliable links with clean routing and predictable results across commercial buildings and data centers.

As a professional manufacturer, HCI engineers matched components to meet common industry standards and maintain consistent channel performance. The designs simplify installation, improve cable organization, and support dependable throughput—making HCI a practical choice for structured networking teams that want fewer callbacks and faster turn-ups.

HCI has supplied cabling solutions since 1975. With over 50 years of experience and modern manufacturing and testing, HCI delivers reliable, high-performance structured cabling products tailored to varied project needs—helping you standardize parts and keep networks running smoothly.

For 1.30-1.40mm Insulated Conductor - Cat 6A shielded modular plugs
Send Inquiry

For 1.30-1.40mm Insulated Conductor

Cable Range: O.D.≦7.5mm

The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm.

The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance.

The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires.

It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time.

- UL Listed, TIA-1096 and IEC 60603-7 compliant
- PC UL94V-2 rated plug housing, 50u” gold plated contact blades
- Supports PoE type 4 (PoE++) application
- Must work with 007A8401 Series Crimping Tool

88S403C0OC52

Cable Adaptability

Insulated Conductor diameter range

Maximum Cable O.D.

Wire Gauge

(1.31~1.40mm) 1.4mm

7.5mm

23AWG

Transmission Concern

Pieces

Load Bar

Guide

2pcs

4-up/4-down load bar

N/A

Material

Dielectric Withstanding Voltage

>1000 VAC

Insulation Resistance

>500 MΩ

Contact Resistance

<20mΩ

Operation Temperature

-10℃ to 60℃

Storage Temperature

-40℃ to 70℃

Durability

> 1000 mating cycles

EU Directive 2002/95/EC

RoHS Compliant

Safety Listing

RU Listed

Dimensions

dimensions

Related Products
  • For 23AWG S/FTP - Modular Plug Boot
    For 23AWG S/FTP
    Φ7.0mm to 8.0mm

    The outer coated boots are made for relieving the cable strain when using large O.D. cable such as Cat 6A S/FTP 23AWG with a diameter of approximately 7.5+-0.5mm. The boot is constructed of PVC which gives a lot of friction between cable and plug. The flexible cone tail guards against improper bending radius that might cause downtime of networks.

Files Download