Crimping Tool for Pass-Through Plugs
Works with HCI Pass-Through Plug Series
The 007A8401 Series Crimping Tool is custom-made for HCI 88U400G, 88S400E, 88U403E and 88S403C Plug Series. Just thread the wires through the end wall of the plug and cut them afterward. The tool terminates the contact blades with insulated conductors and cut off the excess wires flush at the same time without damaging the plug body. The tool is suitable for insulated conductors ranging from 0.85mm to 1.05mm solid and stranded wires.
The cutting die offers more than 5000 times termination cycles. Two spare blades are included for easy replacement.
It is made of carbon steel material with lightweight aluminum-alloyed handle that weighs 420 grams only. Easy to carry around.
007A8401
Cable Compatibility:
|
Insulated Conductor diameter range |
Wire Gauge |
|
0.70~1.40mm |
23 to 26AWG |
- Material
-
Termination Die
Carbon steel
Handle
Aluminum-alloyed
Handle Pad
TPR
Storage Temperature
-40℃ to 70℃
Durability
> 5000 termination cycles
Weight
420g
- Dimensions
-
- Related Products
-
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦5.5mm
The Pass-Through Cat 5e unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦5.5mm
The Pass-Through Cat 5e shielded modular plugs accept from 24 to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6 unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6A unshielded modular plugs accept from 24AWG to 26AWG stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, which is the secret to Cat 6A compliance. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
-
- Files Download
-
-
