RJ-45

RJ-45 to RJ-45 (Cat 5e)

---

A standard coupler typically serves to connect or extend two cable segments without degrading performance. However, an IP-68 rated coupler takes this function to the next level by not only facilitating connections but also providing full waterproofing. The Cat 5e performance allows for a highly efficient feed-through connection that seamlessly supports a data rate of 1 Gbits/sec. This capability operates flawlessly at frequencies reaching up to 100MHz, ensuring reliable and high-speed data transmission without any issues. It features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.

---

RJ-45

RJ-45 to RJ-45 (Cat 6)

---

A standard coupler typically serves to connect or extend two cable segments without degrading performance. However, an IP-68 rated coupler takes this function to the next level by not only facilitating connections but also providing full waterproofing. The Cat 6 performance allows for a highly efficient feed-through connection that seamlessly supports a data rate of 1 Gbits/sec. This capability operates flawlessly at frequencies reaching up to 250MHz, ensuring reliable and high-speed data transmission without any issues. It features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.

---

RJ-45

RJ-45 to RJ-45 (Cat 6A)

---

A standard coupler typically serves to connect or extend two cable segments without degrading performance. However, an IP-68 rated coupler takes this function to the next level by not only facilitating connections but also providing full waterproofing. The Cat 6A performance allows for a highly efficient feed-through connection that seamlessly supports a data rate of 10 Gbits/sec. This capability operates flawlessly at frequencies reaching up to 500MHz, ensuring reliable and high-speed data transmission without any issues. It features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.

---

USB

USB to USB

---

Our USB 3.0 coupler is specifically engineered to connect USB patch cords while supporting impressive data transfer rates of up to 5 Gbps. What sets this coupler apart is its IP-68 waterproof rating, making it an exceptional choice for demanding environments. In settings where moisture and heat are frequent issues, conventional USB couplers typically face difficulties in sustaining reliable performance. Our USB 3.0 waterproof coupler also features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.

---

F

F to F

---

Our IP-68 rated F-Connector coupler is designed to securely connect F-Connector patch cords, making it ideal for outdoor environments. Perfect for satellite TV systems, cable modems, and high-frequency RF applications, this coupler ensures consistent signal transmission for frequencies up to 1GHz or higher when paired with compatible F-Connector cables. It also includes a protective cap secured by a chain, keeping the internal components shielded from harsh conditions when not in use. This added protection extends the lifespan of the coupler, ensuring long-lasting performance in demanding environments.

---

BNC

BNC to BNC

---

The BNC coupler offers waterproof protection, making it suitable for military applications and a variety of radio frequency electronic devices. It connects BNC patch cords to support the BNC interface, which was used in early computer networking systems like the IBM PC Network and 10BASE-2, while providing dependable IP-68 rated protection in harsh or outdoor environments. Equipped with a protective cap attached by a chain, the coupler ensures the internal components remain shielded from tough conditions when not in use, enhancing its durability.

---

RJ-45

Cat 5e

---

Our Cat 5e Keystone Jack supports Gigabit Ethernet up to bandwidth 100MHz. Its field-terminable features enable easy termination of twisted pairs based on job site requirements. Whether you’re working with industrial machinery or outdoor applications, it simplifies establishing an IP-68 connection. The IDC accommodates 23AWG to 24AWG solid wires and is compatible with a 110 punch-down tool. A wire cap is included to secure the wire terminations. Additionally, a protective cover attached by a chain keeps the jack waterproof even when not in use.

---

RJ-45

Cat 6

---

Our Cat 6 Keystone Jack supports Gigabit Ethernet and can handle 10GBASE-T over shorter cabling distances. Its field-terminable features enable easy termination of twisted pairs based on job site requirements. Whether you’re working with industrial machinery or outdoor applications, it simplifies establishing an IP-68 connection. The IDC accommodates 23AWG to 24AWG solid wires and is compatible with a 110 punch-down tool. A wire cap is included to secure the wire terminations. Additionally, a protective cover attached by a chain keeps the jack waterproof even when not in use.

---

Mount Box (25.2φ)

For RJ45 (IECA/IEKA)

---

The Mounting Box IEMA0 is designed for seamless IP-68 rated connections between jacks and cords, featuring two knockout holes on the cover. If you only need one port, you can easily leave the second hole intact. Each knockout hole has a 25.2mm diameter, perfectly fitting our RJ45 Keystone Jacks (IEKA0) or Couplers (IECA). The side panel offers additional flexibility with two smaller holes for M16 cable glands, commonly found in stores, and one larger hole for an M32 conduit gland. You can remove the knockouts based on your specific requirements, making installation straightforward.

---

Mount Box (17.0φ)

For M12 (IECB)

---

The Mounting Box IEMA1 is specifically designed for M12 to RJ45 interface conversions, featuring two knockout holes on the cover. If only one port is needed, you can easily leave the second hole sealed. Each knockout hole measures 17.0mm in diameter, making it a perfect fit for our M12 Female to RJ45 Female Coupler (IECB-XFR0A). The side panel adds more flexibility with two smaller knockouts for M16 cable glands, which are readily available in most stores, and a larger knockout for an M32 conduit gland. You can remove the knockouts based on your installation needs, making the process straightforward.

---

M12 Coupler

M12 Jack to RJ-45 Jack

---

Our M12 X-Coded female to RJ45 female adapter is made from durable zinc-alloy, featuring a rigid die-cast housing that delivers exceptional shielding against EMI. Its impedance is well controlled to support Cat 6A cabling and maintain 10Gbps/Sec. data rate. The Cat 6A channel performance is verified using a Fluke DSX Cable Analyzer with an M12 test adapter, guaranteeing reliable Industrial Ethernet performance.

---

70.5mmx114.4mm

625B10F

---

The 625B10F Series features a front-access design that allows easy installation by mounting the frame first and routing cables through the opening for front-side connector termination. Snap-In Inserts (SIPs) slide back into the frame for a flush finish. This model includes screw covers on the top and bottom, concealing mounting screws for a polished appearance. The frame maintains standard U.S. wall plate dimensions with 83.34mm screw spacing for compatibility with typical mounting boxes and wall cutouts. The SIP cavity measures 75 x 50mm. It accommodates up to three standard 25 x 50mm SIPs or two angled SIPs sized 37.5 x 50mm.

---

74.8mmx119.6mm

625B11AFC

---

As the name “front-access” suggests, installers can mount the 625B11AFC frame onto the wall first and route the cables through the opening. This setup allows connectors—whether data jacks or multimedia modules—to be terminated comfortably at the front side. Once completed, the Snap-In Inserts (SIPs) are simply pushed back into the frame for a flush, clean finish. The 625B11AFC still features a standard U.S. wall plate size with a fixed screw spacing of 83.34mm, ensuring full compatibility with typical mounting boxes and wall cutouts. Internally, the SIP cavity measures 75x50mm. Standard SIPs are sized 25x50mm, allowing up to three SIPs per frame. However, for angled configurations like the SIP3C2 or SIP4C2, which measure 37.5x50mm, only two SIPs can be loaded into a single 625B11AFC frame.

---

Angled Data Port

SIP3C2 / SIP4C2

---

The SIP3C2 and SIP4C2 are angled Sub-Inserts (SIPs) designed for single and double data ports, respectively. Both feature a forward-facing 45° tilt, helping to minimize patch cord protrusion from the wall while easing cable strain. This angled layout not only presents a cleaner profile but also reduces the cable bending radius behind the wall—an advantage in tight spaces or shallow mounting boxes. Each unit occupies 37.5x50mm of frame space, meaning up to two can be installed in a single 625B10F or 625B11AFC Front-Access Frame. Available in office white (RAL 9016), with additional options in electric white and ivory. Molded from flame-retardant ABS plastic (UL94V-0), and fully compliant with NEC and IBC fire code requirements. For visual consistency and a precise fit, pair with HCI 625B10F or 625B11AFC Front-Access Frame whenever possible.

---

Back Box

625MB1140M

---

The 625MB1140M is a single-gang surface-mount back box designed for low-voltage connectivity in hard-wall or open-office environments. Measuring 114mm x 70mm, it is fully compatible with US-type faceplates including 2013AQ, 2013AK, 2013ADN(decorator w/frame), and 625B10F(front-access) Series. The box features rear and side cable entry points with multi-layered, V-cut breakouts that help maintain optimal bending radius when accommodating larger cable bundles or cables with larger outer diameters. Finished in RAL 9016 (Office White) with a 40mm depth, the 625MB1140M is UL 1863 Listed.

---

1-Gang Back Box

625MB14

---

The 625MB14 single-gang back box measures 86x86mm and offers a 47mm depth, providing ample space for bundled cable routing. With a 60mm screw-mount spacing, it’s fully compatible with HCI’s UK-type faceplates and gang frames. Knockouts on all four sides and the base allow flexible cable entry points and help maintain proper bend radius for telecom and data cabling. Each box is molded from durable ABS UL94V-0 flame-retardant plastic, finished in RAL 9016 (Office White), and UL 1863 Listed for communication circuit accessory compliance.

---

2-Gang Back Box

625MB15

---

The 625MB15 double-gang back box measures 146x86mm and also offers a 47mm depth, giving extra room for high-density cable routing. With a 120mm screw-mount spacing, it’s fully compatible with HCI’s UK-type double-gang faceplates and gang frames. Knockouts on all four sides and the base allow flexible cable entry points and help maintain proper bend radius for telecom and data cabling. Each box is molded from durable ABS UL94V-0 flame-retardant plastic, finished in RAL 9016 (Office White), and UL 1863 Listed for communication circuit accessory compliance.

---

Fillet Edge

625B60G

---

The 625B66G features a high-gloss polished surface with a curved profile reminiscent of Legrand-style electric plates. This two-piece design includes a metallic, zinc-alloy rear bracket that enhances grounding and EMI shielding. It’s a French-style single-gang frame, sized at 80 x 80mm with a 45 x 45mm cutout—ideal for housing two 22.5 x 45mm continental-style SIPs. With 60 x 60mm screw spacing, it fits easily into standard continental wall openings or mounting boxes. Standard color is office white (close to RAL 9016). Custom colors are available for orders of 5,000 units or more.

---

1-Gang Back Box

625MB12

---

The 625MB12 is a single-gang back box measuring 80x80mm with a depth of 45mm, providing adequate room for cable bundles in surface-mount setups. With 60mm screw-mount spacing, it’s fully compatible with HCI’s 80x80mm Continental faceplates and gang frames. Knockouts on all four sides and the base allow flexible conduit or cable entry while maintaining proper bend radius for telecom and data cables. The box is molded from UL94V-0 flame-retardant ABS plastic, finished in RAL 9016 (Office White), and UL 1863 Listed as a communication circuit accessory.

---

Mounting Box & Accessories Kits

---

In this section, you'll find everything you need for setting up network connections in industrial environments. Our offerings include a "Mounting Box" to house unprotected interconnections, a "Field Assembly Kit" to create custom waterproof RJ45 or M12 male connectors, and a "Field Terminable Plug" featuring a zinc-alloy die-cast shield that provides strong protection against electromagnetic interference and common mode noise caused by machinery.

---