Cat6 | TAA-Compliant & ISO/IEC-Aligned Cabling Products

Best Seller

Cat6 | Patch Panels, Jacks, Cords & Accessories | HCI

Build stable, high-speed networks with HCI structured cabling products. Our range—covering Cat6, RJ45 connectors, modular plugs, patch panels, couplers, patch cords, cable-management tools, and installation accessories—helps installers deliver reliable links with clean routing and predictable results across commercial buildings and data centers.

As a professional manufacturer, HCI engineers matched components to meet common industry standards and maintain consistent channel performance. The designs simplify installation, improve cable organization, and support dependable throughput—making HCI a practical choice for structured networking teams that want fewer callbacks and faster turn-ups.

HCI has supplied cabling solutions since 1975. With over 50 years of experience and modern manufacturing and testing, HCI delivers reliable, high-performance structured cabling products tailored to varied project needs—helping you standardize parts and keep networks running smoothly.

View our durable network cabling accessories RJ45, Cat5e, Cat6, Cat6A, Modular Plug, Component Level, Keystone Jack, Patch Panel, RJ45 Coupler, USB Coupler, HDMI Coupler and feel free to Contact Us.

Result 97 - 114 of 114

1 2 3 4 5

For 1.00-1.10mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

The “Big Conductor” Cat 6A unshielded modular plugs accept from 23 to 26AWG, U/UTP solid or stranded twisted pair cable with accommodation of insulated conductor from 1.00mm to 1.10mm. The 2-piece design has a “loading-bar” to accept from 1.00 to 1.10mm insulated conductors so all the wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 0.90-1.00mm Insulated Conductor

“3pcs”, 1-row loading bar + windmill guide

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG, stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. 3-piece design. Effective pair separation and maintaining the twist ratio are made possible by the "windmill guide". Together with the “loading bar” attached to it so each wire can be trimmed flush and steadily seated. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 0.90-1.00mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG, stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. 2-piece design. The “6-up/2-down loading bar” is made in two rows. It facilitates moving the green pair away from the other pairs. The most impedance-mismatched pair is put away so as to moderate the noises done to the other pairs. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 0.90-1.00mm Insulated Conductor

“3pcs”, loading bar + windmill guide

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
Plug includes Boot w/Icon

Plug + φ6.7mm Boot + Boot Icon

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
Plug includes Boot w/Icon + Cable SR

Plug + φ6.7mm Boot + Boot Icon + Cable SR

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 0.95-1.05mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

The Snagless Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm. 2-piece design. The loading bar is made in two rows - “6-up/2-down”. It facilitates moving the green pair away from the other pairs. The most impedance-mismatched pair is put away so as to moderate the noises done to the other pairs. Each wire is trimmed flush and steadily seated. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 1.30-1.40mm Insulated Conductor

Cable Range: O.D.≦7.5mm

The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm. The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
For 0.55-0.60mm Insulated Conductor

w/SR for 4.0mm cable entrance

The “Small Conductor” Cat 6A shielded modular plugs accept 28AWG and 30AWG ultra-slim cables. 30AWG cable has nominal insulations at approximately 0.53mm only. The 2-piece design has a “loading-bar” to accept from 0.55 to 0.60mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. 3-prong blades further enhance the certainty of piercing the ultra-slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades
For 1.35-1.45mm Insulated Conductor

“2pcs”, 4-up/4-down loading bar

The “Big Conductor w/Hook” Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.35mm to 1.45mm and cable O.D. less than 8.0mm. This could be the plug that accommodates the largest foamed wires on the market so far! 2-piece design. The “4-up/4-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. It artfully enlarges the spacing between “pin 3 to pin 4” and “pin 5 to pin 6”. In this way, the noise between the blue and green pair can be mitigated so as to easily pass “Cat 6A Patch Cord Test Limit”. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
For 110 IDC

3013AMT110H

The Impact Punch Down Tool efficiently terminates keystones and patch panels using its removable 110 and 88 type blades. It seats wires securely into terminal blocks and trims excess length in one go. An adjustable impact setting adapts to terminating various cable gauges.
For KRONE IDC

3013AMTH02

The interchangeable Punch Down Tool (Impact / Non-Impact) efficiently terminates patch panels using its unremovable Krone and 110 type blades. It seats wires securely into terminal blocks and trims excess length in one go.
Data

3013ACSH01

Effortlessly strip UTP/STP twisted pair cables with one hand using our intuitively designed Twisted Pair Lightweight Cable Stripper. It accommodates a broad range of Cable O.D. (∅3.5~∅9mm) without requiring any adjustments. Designed to prevent nicks to the insulated conductors during the stripping process.
Adjustable Data

3013ACSH02

Effortlessly strip and cut UTP/STP twisted pair cables or multi-conductor wires with just one hand using our Twisted Pair Adjustable Cable Stripper with Cutter designed for precision. It handles a wide range of Cable O.D. (∅3.5~∅9mm) with an adjustable cutting depth for accuracy. The incorporated bouncy controller (the red part) serves as a protection to prevent nicks to the insulated conductors during the stripping process.
Voice/Data/CATV

3013ACSH03A

Strips and cut coax (video), twisted pair (data), telephone round and flat (voice) and other multi-conductor cables in 18 & 24 AWG. The Versatile Adjustable Stripper with Cutter handles a range of Cable O.D. from ∅3.2 to ∅8mm with an adjustable cutting depth for accuracy. It also comes with a black velcro strip attached at the bottom to brushes the braid screen back over the cable jacket.
RJ-45

RJ-45 to RJ-45 (Cat 6)

A standard coupler typically serves to connect or extend two cable segments without degrading performance. However, an IP-68 rated coupler takes this function to the next level by not only facilitating connections but also providing full waterproofing. The Cat 6 performance allows for a highly efficient feed-through connection that seamlessly supports a data rate of 1 Gbits/sec. This capability operates flawlessly at frequencies reaching up to 250MHz, ensuring reliable and high-speed data transmission without any issues. It features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.
RJ-45

RJ-45 to RJ-45 (Cat 6A)

A standard coupler typically serves to connect or extend two cable segments without degrading performance. However, an IP-68 rated coupler takes this function to the next level by not only facilitating connections but also providing full waterproofing. The Cat 6A performance allows for a highly efficient feed-through connection that seamlessly supports a data rate of 10 Gbits/sec. This capability operates flawlessly at frequencies reaching up to 500MHz, ensuring reliable and high-speed data transmission without any issues. It features a protective cap linked by a chain, which keeps the contacts and PCB assembly shielded from harsh conditions when the coupler is not in use, thus enhancing its lifespan.
RJ-45

Cat 6

Our Cat 6 Keystone Jack supports Gigabit Ethernet and can handle 10GBASE-T over shorter cabling distances. Its field-terminable features enable easy termination of twisted pairs based on job site requirements. Whether you’re working with industrial machinery or outdoor applications, it simplifies establishing an IP-68 connection. The IDC accommodates 23AWG to 24AWG solid wires and is compatible with a 110 punch-down tool. A wire cap is included to secure the wire terminations. Additionally, a protective cover attached by a chain keeps the jack waterproof even when not in use.