Pass-Through C6A Plug w/Slim Boot | HCI

“Cat 6A patch cord test limit” is by far the most stringent crosstalk limit for data patch cords. Unfortunately, Cat 6A plug assembly is really time-consuming and requires great skills. Is there any way to assemble a plug more quickly while maintaining an acceptable Cat 6A headroom? Yes, I think there is.The pass-through plug might just be the one you are looking for. It allows threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, with no room for kink and slack. The extremely short stripped length is the key to achieving Cat 6A compliance.Works with 007A8ST014 Series Crimping Tool. Wire termination and cutting at the same time.The 8-position groove inside the plug housing is 1.0mm+0.02/-0mm wide and the entrance accepts cable sizes smaller than 6.5mm.The 3-prong blades enhance the certainty of piercing the stranded cable so excellent conductivity can be assured.An alternative solution for connecting to 10 Gigabit Ethernet. Explore HCI categories to plan complete Pass-Through C6A Plug w/Slim Boot cabling solutions. Move from families to matched components for stable channels.