-
With Cable Gland
88TS52G26ATK
The 88TS52G26ATK is the initial variant of the 88TS52G product family, specifically designed to cater to the requirements at installation sites. It possesses a shorter body length while still providing a substantial grounding area. It enables the seamless connection of end devices, such as Wi-Fi APs, with minimal spacing requirements and without any restrictions. Featuring a 360-degree air-tight enclosure, the plug offers comprehensive protection against electromagnetic interference (EMI). Its cable gland is equipped with an elastic gasket, enabling a secure and adjustable fit to accommodate a range of cable sizes. The 88TS52G26ATK plug delivers outstanding performance, exceeding the required standards with a considerable margin in both Cat 6A Modular Plug Terminated Link (MPTL) and the more rigorous Cat 6A Patch Cord Test Limit. The plug is designed to be fully compatible with the IEEE 802.3bt 4PPoE (Power over Ethernet) requirement. It is capable of efficiently delivering 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD), meeting the power delivery standards specified by PoE Type 4. At the PD end, it ensures the reception of a reliable 71.3W power supply, providing consistent and stable power to PoE Type 4 devices.
-
With Strain Relief
88TS52G6ATKBT
The 88TS52G6ATKBT is part of the 88TS52G product family and serves as the flagship model in the series. It features a standard body length that offers a generous grounding area of approximately 10mm. The regular length of the plug body provides an adequate buffer that helps maintain a proper bending radius when installed with cables routed through the ceiling or wall. This ensures good strain relief and promotes a reliable connection when connected to PoE built-in equipment. The proper bending radius and strain relief contribute to the overall stability of the connection, enhancing the reliability of the network infrastructure. The 88TS52G6ATKBT plug excels in performance, demonstrating exceptional results in both Cat 6A Modular Plug Terminated Link (MPTL) and even the more demanding Cat 6A Patch Cord Test Limit, surpassing the required standards with a significant margin. The plug is fully compatible with the IEEE 802.3bt 4PPoE (Power over Ethernet) requirement. It has the capability to efficiently deliver 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD), meeting the power delivery standards mandated by PoE Type 4. At the PD end, it ensures the reception of 71.3W of power, ensuring reliable and consistent power supply for PoE Type 4 devices.
-
Bayonet Mounting
88TS52G36ATK
The 88TS52G36ATK is the second variant of the 88TS52G product family, offering a unique securing methodology known as bayonet mounting. This innovative design provides an effortless installation process compared to conventional screw-type connections. The advantages of bayonet mounting become particularly evident when dealing with large-scale installations involving hundreds of nodes in a single day. With the spring-loaded mechanism, the plug ensures a secure and locked connection as the cable gland is rotated at the rear, eliminating any concerns about potential loosening of screw fixtures. With its shorter body length, the plug is specifically designed to accommodate various scenarios encountered when making connections between the incoming cable and end devices like Wi-Fi APs. This compact design offers flexibility and unrestricted connectivity, even in tight spaces or challenging installation environments, effectively overcoming any space limitations. The 88TS52G36ATK plug delivers outstanding performance, surpassing the required standards with a significant margin in both Cat 6A Modular Plug Terminated Link (MPTL) and the more stringent Cat 6A Patch Cord Test Limit. Its exceptional results highlight its reliability and capability to exceed industry requirements, ensuring reliable and high-performance connectivity in various network applications. The plug has been meticulously designed to achieve full compatibility with the IEEE 802.3bt 4PPoE (Power over Ethernet) requirement. It possesses the ability to efficiently deliver 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD) with received power 71.3W, meeting the power delivery standards mandated by PoE Type 4.
-
Compact Size
88TS52G46ATK
The 88TS52G46ATK is the most compact variant in the 88TS52G product family. Its small size offers the advantage of easy installation in nearly any limited space encountered at various sites. While it features a shortened grounding area compared to traditional plugs with robust cable glands, it is adequate for providing protection against common mode signals in most commercial building environments. With proper grounding procedures in place, it is capable of providing sufficient protection with acceptable electromagnetic compatibility. Similar to other variants in the 88TS52G product family, the 88TS52G46ATK maintains exceptional performance and ensures that the body length does not compromise the transmission speed it is designed to deliver. This plug effortlessly meets the requirements for Modular Plug Terminated Link (MPTL) at any cabling length. Additionally, it successfully passes advanced testing with Cat 6A Patch Cord Limit, showcasing its versatility for various applications where modular plugs are utilized. Without a doubt, compliance with the IEEE 802.3bt standard is essential for field termination plugs used in PoE applications. The 88TS52G46ATK plug is fully compatible with high-power 4PPoE, delivering 90W of power from the Power Sourcing Equipment (PSE) and ensuring the receipt of 71.3W at the Powered Device (PD), in accordance with the standard regulations.
-
Cat 8.1 STP Field Termination Plug
88TS52GA8TK
The 88TS52GA8TK series is equipped with larger Cat 8 S/FTP 22AWG cable receptacle. This design feature on wire organizor allows for convenient routing of each insulated conductor through its dedicated slot, ensuring effortless seating and installation. The Cat 8.1 PCBA is specifically designed for assembly at both ends of a Cat 8 patch cable, with the total combined length extending from the Permanent Link being less than 6 meters. This configuration enables the completion of the standard-specified channel of less than 30 meters. It enables the successful establishment of a ANSI/TIA-568.2-D Cat 8.1 standard-specified channel of less than 30 meters, supporting 25GBASE-T and 40GBASE-T transmission over copper cabling. In regards to cable routing flexibility, the plug incorporates a free-directional cable entrance that seamlessly adjusts to accommodate the incoming cable. Whether the cable is routed from the top or the sides, you have the versatility to customize the cable patch by securely closing the two-piece guiding lids and rotating them as necessary. This feature ensures convenient and adaptable cable management for various installation scenarios.
-
Cat 6A STP Field Termination Plug
88TS52G2A6ATK
The 88TS52G2A6ATK series incorporates a two-row prewired mechanism, allowing for the convenient routing of each pair through its designated slot and effortless seating. The screw-type rotatable cable gland is specifically designed to accommodate various cable sizes, ranging from 23AWG solid to 26AWG stranded cables, irrespective of whether they are S/FTP, F/FTP, F/UTP, or U/FTP shielded types. Depending on the diameter of the cable, you have the flexibility to adjust the tightness of the attached grounding by screwing it tightly or loosely according to your requirements. The plug features a free-directional cable entrance that can easily adapt to the incoming cable. Regardless of whether the cable is routed from the top or the sides, you have the flexibility to adjust the cable patch by closing the two-piece guiding lids and rotating them as needed. The plug is compliant with the rigorous standards of IEC 60512-99-002, which guarantee its durability even during numerous mating cycles under electrical load. This compliance aligns with the compatibility requirements set forth by IEEE 802.3bt. The shielded angled type plug is designed to support 4PPoE Class 8 power levels, enabling the transmission of up to 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD) over four twisted pairs. Moreover, the HCI 88TK series plugs are compliant with IEC 60512-99-002 standards, ensuring durability during mating cycles under electrical load, in accordance with the compatibility requirements of IEEE 802.3bt.
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦5.5mm
The Pass-Through Cat 5e unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦5.5mm
The Pass-Through Cat 5e shielded modular plugs accept from 24 to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 5.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6 unshielded modular plugs accept 24AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.95-1.05mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 1.05-1.15mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Snagless Pass-Through Cat 6 unshielded modular plugs accept from 23AWG to 26AWG, solid or stranded unshielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6 shielded modular plugs accept 24AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
For 0.95-1.05mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 1.05-1.15mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Snagless Pass-Through Cat 6 shielded modular plugs accept from 23AWG to 26AWG, solid or stranded shielded twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. “The Snagless” allows easy pulling through crowded distribution frames or cable management trays. “The Pass-Through” enables the threading of all wires through the plug's end wall for subsequent cutting. It must work with 007A8502 Series Crimping Tool for termination and cutting of wires both at once! - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8502 Series Crimping Tool
-
For 0.90-1.00mm Insulated Conductor
Cable Range: O.D.≦6.5mm
The Pass-Through Cat 6A unshielded modular plugs accept from 24AWG to 26AWG stranded unshielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. The Pass-Through plug gives you the convenience of threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, which is the secret to Cat 6A compliance. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
-
For 1.30-1.40mm Insulated Conductor
Cable Range: O.D.≦7.5mm
The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm. The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool
-
Crimping Tool for Pass-Through Plugs
Works with HCI Pass-Through Plug Series
The 007A8401 Series Crimping Tool is custom-made for HCI 88U400G, 88S400E, 88U403E and 88S403C Plug Series. Just thread the wires through the end wall of the plug and cut them afterward. The tool terminates the contact blades with insulated conductors and cut off the excess wires flush at the same time without damaging the plug body. The tool is suitable for insulated conductors ranging from 0.85mm to 1.05mm solid and stranded wires. The cutting die offers more than 5000 times termination cycles. Two spare blades are included for easy replacement. It is made of carbon steel material with lightweight aluminum-alloyed handle that weighs 420 grams only. Easy to carry around.
-
Crimping Tool for Snagless Thru Plugs
Works with HCI Snagless Pass-Through Series
Crimp and cut HCI Snagless Pass-Through Plug Series (UTP plug: 88U51220AD52, 88U5122S1D52; STP plug: 88S51440AD52, 88S51430AD52) with this custom-made 007A8502 Plug Crimping Tool. Comes with dual cavity ground crimp to wrap STP plug's ground collar onto cable. The horizontal crimping design gives a relatively flat and consistent force to minimize uneven pressure or distortion for consistent and high-quality termination with its stable and straightforward crimping motion.
- Home Homepage
- This is HCI Company Profile
- Products Data Connectivity
-
Solutions Transmission Category
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- In the Know Download Catalog
- Contact Us Send us an inquiry