For 0.70-0.80mm Insulated Conductor

w/SR for 4.5mm cable entrance

---

The “Small Conductor” Cat 6A unshielded modular plugs accept 26AWG and 28AWG slim cables. 28AWG UTP cable has a 0.69mm insulation diameter with nominal cable O.D. from 3.5mm to 4.8mm only. The 2-piece design has a “loading-bar” to accept from 0.70 to 0.80mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. 3-prong blades further enhance the certainty of piercing the slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades

---

For 0.55-0.60mm Insulated Conductor

w/SR for 4.0mm cable entrance

---

The “Small Conductor” Cat 6A unshielded modular plugs accept 28AWG and 30AWG ultra-slim cables. 30AWG cable has nominal insulations at approximately 0.53mm only. The 2-piece design has a “loading-bar” to accept from 0.55 to 0.60mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. 3-prong blades further enhance the certainty of piercing the ultra-slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades

---

For 1.00-1.10mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

---

The “Big Conductor” Cat 6A unshielded modular plugs accept from 23 to 26AWG, U/UTP solid or stranded twisted pair cable with accommodation of insulated conductor from 1.00mm to 1.10mm. The 2-piece design has a “loading-bar” to accept from 1.00 to 1.10mm insulated conductors so all the wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For C6/ C6A UTP plug

Φ6.4mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.4mm unshielded cable O.D.

---

C6A Unshielded

---

“Cat 6A patch cord test limit” is by far the most stringent crosstalk limit for data patch cords. There’s a divergence between ANSI/TIA-568.2-D and ISO-11801-1 standards. TIA-568.2-D offers a relatively relaxed standard. Due to the crosstalk severity between the green pair (3.6) and the blue pair (4.5), the limit for these two critical pairs is mitigated in comparison to other pair combinations. On the other hand, ISO-11801 adheres to the identical requirement for all pair combinations. That is to say, the patch cord that complies with ISO-11801 Cat 6A limit will definitely yield you TIA-568.2-D Cat 6A compliance.

---

C6 Unshielded

---

The "Cat 6 patch cord limit" pass is more challenging for Cat 6 plug assemblies than it is for Cat 5e. In this section, you will find a variety of Unshielded Cat 6 modular plugs categorized in different cable adaptability and multiple pieces for transmission concerns. You may locate the plug that best suits your needs. One thing in common is the plugs are all 50u” gold-plated contact blades to ensure conductivity from erosion and durability for up to a thousand mating cycles. The contact blades' “3-prong” construction improves the cable's compatibility to a variety of insulated conductors. And the housing is UL94V-0 rated flame-retardant to meet commercial building safety regulations. User-friendly design. Optional “loading bar” and “guide” helps to assemble patch cords that would successfully pass the stringent TIA-568.2-D and ISO-11801 Cat 6 Patch Cord Test Limit. Designed and produced according to FCC part 68 and IEC 60603-7 standards. The precise mechanism ensures interoperability with any fixed connections available in the market.  Standard – suits any 24AWG solid to 26AWG stranded cable. Multiple pieces are available for transmission concerns.  Pass Through – an easy way to thread 24AWG to 26AWG wires through.  Snagless PassThrough – combines both “through” and “snagless” features in one design.  Small Conductor – specially made for 28AWG slim and 30AWG ultra slim cable.  Big Conductor – features bigger grooves to accept 23AWG cable with insulated conductors up to 1.10mm.

---

C5e Unshielded

---

In this section, you will find the essential Unshielded Cat 5e modular plugs. The contact blades of the plugs are 50u" gold-plated to assure conductivity against erosive wear and endurance for up to 1,000 mating cycles. The housing is UL94V-0 flame-retardant rated to comply with safety rules for commercial buildings. The plugs feature 3-prong blades which give better cable adaptability to a wide range of insulated conductors. The 3-Prong blades enhance the competency of piercing the wires. Designed and produced according to FCC part 68 and IEC 60603-7 standards. The precise mechanism ensures interoperability with any fixed connections available in the market.  Standard – suits any 24AWG solid to 26AWG stranded cable.  Pass Through – gives you an option to efficiently thread the wires through.  Small Conductor – specially made for 26AWG and 28AWG slim cable.

---