-
Pass Through
Plug assembly can be time-consuming and requires great skills. Conventional assembly process – line up the wires and trim flush, and insert the wires until they reach the end wall of the plug… everything sounds great but in reality, the wires get kinked or slack. The kink and slack could jeopardize the conductivity and worsen the transmission performance. A pass-through plug can be a great helper because it offers the possibility to thread the wires through the end wall and cut them afterward. It greatly increases job efficiency and reduces continuity-failure rates. Works with 007A8ST014 Series Crimping Tool. Simultaneously terminating and cutting wires. The 8-position groove inside the plug housing is 1.0mm+0.02/-0mm wide and the entrance accepts cable sizes smaller than 6.5mm. The 3-prong blades enhance the certainty of piercing both the solid and the stranded cable so excellent conductivity can be assured. Exceeds TIA-568.2-D and ISO/IEC 11801 Cat 6 transmission standards.
-
Pass Through
“Cat 6A patch cord test limit” is by far the most stringent crosstalk limit for data patch cords. Unfortunately, Cat 6A plug assembly is really time-consuming and requires great skills. Is there any way to assemble a plug more quickly while maintaining an acceptable Cat 6A headroom? Yes, I think there is. The pass-through plug might just be the one you are looking for. It allows threading the wires through the end wall and cutting them afterward. Only a very short untwisted length is presented while the cable is fully inserted into the taper, with no room for kink and slack. The extremely short stripped length is the key to achieving Cat 6A compliance. Works with 007A8ST014 Series Crimping Tool. Wire termination and cutting at the same time. The 8-position groove inside the plug housing is 1.0mm+0.02/-0mm wide and the entrance accepts cable sizes smaller than 6.5mm. The 3-prong blades enhance the certainty of piercing the stranded cable so excellent conductivity can be assured. An alternative solution for connecting to 10 Gigabit Ethernet.
-
Pass Through w/Hook
“Cat 6A patch cord test limit” is by far the most stringent crosstalk limit for data patch cords. Unfortunately, Cat 6A plug assembly is really time-consuming and requires great skills. Is there any way to assemble a plug more quickly while maintaining an acceptable Cat 6A headroom? Yes, I think there is. The pass-through plug might just be the one you are looking for. It is a 2-piece design. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. It allows threading the wires through the loading bar. Insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the key to achieving Cat 6A compliance. The 8-position groove of the loading bar is 1.4mm+0.02/-0mm wide and the entrance accepts cable sizes smaller than 7.5mm. An easy way to thread S/FTP 23AWG wires through with the rear grounding hook for encircling the cable braid. Dual advantages in a single design. Works with 007A8ST014 Series Crimping Tool. Wire termination and cutting at the same time. An alternative solution for connecting to 10 Gigabit Ethernet.
- Home Homepage
- This is HCI Company Profile
- Products Data Connectivity
-
Solutions Transmission Category
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- In the Know Download Catalog
- Contact Us Send us an inquiry