For 1.05-1.15mm Insulated Conductor

“2pcs”, 4-up/4-down loading bar

---

The “Big Conductor w/Grounding Bar” Cat 6 shielded modular plugs accept from 23 to 24AWG, F/UTP and S/FTP twisted pair cable with accommodation of insulated conductor from 1.05mm to 1.15mm and cable O.D. less than 6.5mm. Grounding is facilitated by the external grounding bar. 2-piece design. The “4-up/4-down loading bar” is made in two rows. It allows you to artfully enlarge the spacing between “pin 3 to pin 4” and “pin 5 to pin 6”. In this way, the noise between the blue and green pair can be mitigated so as to easily pass “Cat 6 Patch Cord Test Limit”. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For 0.90-1.00mm Insulated Conductor

“3pcs”, 1-row loading bar + windmill guide

---

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG, stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. 3-piece design. Effective pair separation and maintaining the twist ratio are made possible by the "windmill guide". Together with the “loading bar” attached to it so each wire can be trimmed flush and steadily seated. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For 0.90-1.00mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

---

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG, stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm and cable O.D. less than 6.5mm. 2-piece design. The “6-up/2-down loading bar” is made in two rows. It facilitates moving the green pair away from the other pairs. The most impedance-mismatched pair is put away so as to moderate the noises done to the other pairs. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For 0.90-1.00mm Insulated Conductor

“3pcs”, loading bar + windmill guide

---

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

Plug includes Boot w/Icon

Plug + φ6.7mm Boot + Boot Icon

---

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

Plug includes Boot w/Icon + Cable SR

Plug + φ6.7mm Boot + Boot Icon + Cable SR

---

Standard Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.90mm to 1.0mm. 3-piece design. The “windmill guide” helps to separate each pair and keep its twist ratio. The “loading bar” is made to attach to the guide so each wire can be trimmed flush and steadily seated. This may be the trick needed by many field installers to pass the "Cat 6A Patch Cord Test Limit." - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-0 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

Crimping Tool for Standard w/Hook

Works with 88S201KS plug series

---

Crimp RJ-45 8P plugs and ground collar at one press using this 007A8201 Crimping Tool. Compatible with STP Standard w/Hook plugs (88S201KS1B50 & 88S201KS2B50 series)

---

For 0.95-1.05mm Insulated Conductor

“2pcs”, 6-up/2-down loading bar

---

The Snagless Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm. 2-piece design. The loading bar is made in two rows - “6-up/2-down”. It facilitates moving the green pair away from the other pairs. The most impedance-mismatched pair is put away so as to moderate the noises done to the other pairs. Each wire is trimmed flush and steadily seated. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

For 1.30-1.40mm Insulated Conductor

Cable Range: O.D.≦7.5mm

---

The Pass-Through Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.30mm to 1.40mm. The Pass-Through plug gives you the convenience of threading the wires through the loading bar. The “1357-up/2468-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. Simply insert the bar all the way till it reaches the narrow gate and cut all wires afterward. Only a very short untwisted length is presented with no room for kink and slack. The extremely short stripped length is the secret to Cat 6A compliance. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. It works with 007A8401 Series Crimping Tool. Wire termination and cutting at the same time. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application - Must work with 007A8401 Series Crimping Tool

---

For 0.55-0.60mm Insulated Conductor

w/SR for 4.0mm cable entrance

---

The “Small Conductor” Cat 6A shielded modular plugs accept 28AWG and 30AWG ultra-slim cables. 30AWG cable has nominal insulations at approximately 0.53mm only. The 2-piece design has a “loading-bar” to accept from 0.55 to 0.60mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. 3-prong blades further enhance the certainty of piercing the ultra-slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades

---

For 1.35-1.45mm Insulated Conductor

“2pcs”, 4-up/4-down loading bar

---

The “Big Conductor w/Hook” Cat 6A shielded modular plugs are made to accept 23AWG S/FTP foamed wires with accommodation of insulated conductor from 1.35mm to 1.45mm and cable O.D. less than 8.0mm. This could be the plug that accommodates the largest foamed wires on the market so far! 2-piece design. The “4-up/4-down loading bar” is made in two rows. It eases the tension throughout the assembling procedure instead of aligning in a single row. It artfully enlarges the spacing between “pin 3 to pin 4” and “pin 5 to pin 6”. In this way, the noise between the blue and green pair can be mitigated so as to easily pass “Cat 6A Patch Cord Test Limit”. The external grounding hook is built at the rear for encircling the screened braid of S/FTP cable. The 360-degree shield surrounding favors the screen effectiveness and shield integrity that high-speed Ethernet requires. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application

---

Crimping Tool for Snagless Thru Plugs

Works with HCI Snagless Pass-Through Series

---

Crimp and cut HCI Snagless Pass-Through Plug Series (UTP plug: 88U51220AD52, 88U5122S1D52; STP plug: 88S51440AD52, 88S51430AD52) with this custom-made 007A8502 Plug Crimping Tool. Comes with dual cavity ground crimp to wrap STP plug's ground collar onto cable. The horizontal crimping design gives a relatively flat and consistent force to minimize uneven pressure or distortion for consistent and high-quality termination with its stable and straightforward crimping motion.

---

For C5e STP plug

Φ6.4mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.4mm shielded cable O.D.

---

For C6/ C6A STP plug

Φ6.5mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.5mm shielded cable O.D.

---

STP Component

---

STP Channel

---

STP Component

---

In this section, you’ll find HCI Shielded Component-Rated Patch Panels. What does Component-Rated mean? Let’s take Augmented Cat 6 for example, Component-Rated means the Patch Panel itself meets ISO/IEC 11801 Ed. 2.2 Cat 6a (the stricter requirements) or ANSI/TIA 568.2-D Cat 6A connecting hardware test limits. Connecting Hardware Limits are the most stringent requirements a patch panel could have. A patch panel meets NEXT, FEXT, Return Loss, Insertion Loss, TCL/TCTL and Alien Crosstalk requirements is entitled to “Component-Rated”. Shielded Component-Rated Patch Panels will benefit you in many ways: 1. Shielded System is recommended for its privilege of EMI prevention & thorough immunity of Alien Crosstalk. 2. If Power over Ethernet is taken into account, Shielded System provides better heat dissipation and attenuation. 4. Short links – you won’t have to worry the minimum point to point cabling length potentially used in data center. 5. Mixed and Match – you can freely mixed and match other suppliers’ patch cords and cables to link up the cabling. 6. Interconnection on the field – you’ll have fair margins when linking up all kinds of inter or cross connection with the other patch panel in telecomm or equipment rooms regardless of the patch cord length.

---

STP Feed-Through

---

Feed-through RJ-45 to RJ-45 type patch panels are getting more and more popular recently because they offer Plug-and-Play convenience when connecting to switches and routers. A common fact is Feed-Through panels downgrade the transmission performance in the whole cabling. The answer is Yes and No. YES – there is no component-rated Feed-Through panel available because there’s no standard for it. NO – choosing a good Feed-Through panel SP48KMCA would give you equivalent performance that supports all kinds of inter-connection or cross-connection you may possibly encounter on the sites. Various categories are available in ISO-11801 ClassEa, ANSI/TIA-568.2-D Cat 6A and Cat 6 channel performance. Depends on different project requirements, you can freely choose the favorable ones to satisfy your actual needs.

---

STP Channel

---

HCI offers patch panels in Channel / Perm. Link Level as well to maximize customer's choices in different project scenario. Available in regular 24-port in 1 unit, 48-port in 1 unit and 24-port in 0.5 unit. Depends on different site deployment, you’ll find the right panel that best suits your needs.

---

STP Blank Panel

---

Shielded System is the most recommended for its privilege of EMI prevention & thorough immunity of external noises. Thus 24-port in 1U “shoulder by shoulder” port alignment is no longer a problem. No maximized spacing between each port is needed since alien crosstalk is no longer a problem for shielded connectors. SP24N Series will do the jobs. We can even put 48-port in 1U if we want to take that advantage to the extreme. 48-port in 1U will save a lot of precious rack space in Data Center. SP482 Series are here to solve your problems in dense cabinets.

---

STP Panel Mountable

---

HCI Panel Mountable Coupler features standard 14.55mm x 16.05mm jack opening and is mountable to any universal 19.20mm (±0.20) height mounting fixtures. Unlike Unshielded Keystone Couplers, Shielded Keystone Couplers provide good immunity against EMI/RFI. Shielded system is still preferable if budget permits. The premium 3013AKICS Series offer various Cat 6A options from ISO-11801 ClassEa to TIA-568.2-D Cat 6A channel performance. It is housed by zinc-alloyed die-cast body which gives the best airtight radiation prevention and robustness. The patented US 9391405 B1 design features Inductance-offset technique to relieve the disturbance caused by Feed-Through connection. 3013AJSI Series feature brass-housing screen which will do the jobs in all kinds of Cat 6 and Cat 5e sites. Alternatively, 3013AJSQ6A Series can be a good solution in certain occasions where wall depth is limited. It rotates RJ-45 female port in 90 degree so the routing direction can be vertically converted.

---

STP Mobile Style

---

HCI Shielded Mobile Style RJ45 feed-through coupler provides a female-to-female feed-through connection for easy cable hook-up. It works as conjunction in permanent link or alternatively an extension next to outlet in channel. 3013AKMCAS Series offer various Cat 6A options from ISO-11801 Class Ea to TIA-568.2-D Cat 6A channel performance. The patented US 9391405 B1 design features Inductance-offset technique to relieve the disturbance caused by Feed-Through connection.

---

STP Conjunction Box

---

Shielded conjunction box provides a cable-to-cable connection for more flexible cabling application.

---

STP Straight Type

---