Slim Boot (Embedded Type)

Suitable Cable Range: 5.0/5.5/6.0/6.5mm

---

The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.0mm/5.5mm/6.0mm/6.5mm cable O.D. for options

---

Slim Boot (Embedded Type)

Suitable Cable Range: 4.0/4.5/5.0/5.5/6.5mm

---

The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options

---

Snagless Boot (Embedded Type)

Regular Length, 6.0φ and 6.5φ for Options

---

When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. A single boot fits all.

---

Snagless Boot (Embedded Type)

Short Body, 4.7φ and 6.5φ for Options

---

When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. Comparing to regular snagless boot P/N. SR511E02, this short snagless boot further enables cable-bending in a relatively narrower space. The transparent housing saves you from matching the colors of cables. One single boot fits all.

---

Outer Coated Type

Φ5.5 to 6.5mm

---

The outer coated boots are made for reducing the cable strain when using solid cables with a diameter of approximately 6.0+-0.5mm. The boot is made of PVC, which elastically guards the cable and plug connection. The interdigit cone tail protects against improper bending that might result in signal reflections and intermittence of networks.

---

For Snagless Plug

Regular

---

When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. A single boot fits all.

---

For Snagless Plug

Short

---

When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. Comparing to regular snagless boot P/N. SR511E02, this short snagless boot further enables cable-bending in a relatively narrower space. The transparent housing saves you from matching the colors of cables. One single boot fits all.

---

For C5e Plug

Φ5.5mm to 6.5mm

---

The embedded boot provides convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.5mm/6.0mm/6.5mm cable O.D. for options

---

For C6/C6A Plug

Φ4.0mm to 6.5mm

---

The embedded boot provides convenience when being used in fully populated blade switches or high density patch panels. The slender body sits flush with the RJ-45 plug. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options

---

For 23AWG S/FTP

Φ7.0mm to 8.0mm

---

The outer coated boots are made for relieving the cable strain when using large O.D. cable such as Cat 6A S/FTP 23AWG with a diameter of approximately 7.5+-0.5mm. The boot is constructed of PVC which gives a lot of friction between cable and plug. The flexible cone tail guards against improper bending radius that might cause downtime of networks.

---

Large O.D. Boot (Coated Type)

Suitable Cable Range: 7.0/7.5/8.0mm

---

The outer coated boots are made for relieving the cable strain when using large O.D. cable such as Cat 6A S/FTP 23AWG with a diameter of approximately 7.5+-0.5mm. The boot is constructed of PVC which gives a lot of friction between cable and plug. The flexible cone tail guards against improper bending radius that might cause downtime of networks. - 7.0mm/7.5mm/8.0mm cable O.D. for options

---

For C5e STP plug

Φ6.4mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.4mm shielded cable O.D.

---

For C6/ C6A UTP plug

Φ6.4mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.4mm unshielded cable O.D.

---

For C6/ C6A STP plug

Φ6.5mm

---

The integrated boot offers convenience when using it in densely populated blade switches or high-density patch panels. Its slim body seamlessly aligns with the width of the modular plug, ensuring no interference between adjacent ports. The distinguishing feature of this boot is its composition(double-shot), as it is crafted using a dual-material design. The two claws responsible for securely gripping the modular plug are constructed from rigid PC (Polycarbonate) material. Meanwhile, the tail boot is fabricated from a flexible PVC material, enabling free-directional orientation without any constraints. - PC(claws)/PVC(tail boot) UL94V-2 rated - For approximately 6.5mm shielded cable O.D.

---

Boot

---

RJ-45 Plug boots relieve cable strain and guard against the plug's latch from snagging or breaking. In essence, there are two types of boot designs – “Coated” and “Embedded”. Coated type: The “Coated type” boot coats the RJ-45 plug body and covers the latch. Friction between the cord and the plug is greatly increased by the surrounding structure. The flexible cone tail enforces the proper bending radius to further prevent signal reflections. Embedded type: The size of the “Embedded type” boot matches the plug precisely. When completely populated in a high-density equipment or patch panel, the slim figures prevent interference between one port and the other. Two paws from the boot are inserted within the stopper, providing effective strain relief from tugging. Works with both UTP and STP Cat 5e, Cat 6, and Cat 6A cables. Accepts cables with a diameter ranging from 4.0mm to 8.0 mm.

---

UTP Boot-Assembled

---

U/UTP booted type stranded round patch cord or patch cables are electrical cables, used to connect ("patch-in") one electronic device to another for signal routing. We offer plugs in standard configurations to terminate patch cords for patching or workstation applications. Patch cords can be terminated to the exact length needed for neater, more organized installations and are RoHS compliant.

---