-
Faceplate with Label & Shutter
B622 Series
B622 series faceplate with shutter is ideal for the installation of keystone jacks, available in 2- and 3-port, which includes label for port designation.
-
Single-Gang / Dual Gang Back Box
MB14 / MB15 Series
MB14 / MB15 series back box is designed to mount into a wall, floor or other flat surface. Convenient “molded-in” rear and side cable entries easily accommodate coax or optical fiber. Unit includes screws and double-sided tape for mounting, rubber-door and cable tie.
-
Single-Gang Faceplate
B22AF Series
B22AF series single-gang faceplate attractively houses keystone jacks and snap in according to your needs. When requirements are changed, simply disconnect and snap out unneeded units, then connect and snap in new one.
-
Single-Gang / Dual-Gang / Triple-Gang Faceplate
B60 Series
B60 Series faceplates are ideal for the installation of keystone jacks, data, voice and A/V connectors.
-
Half-Gang / Single-Gang Module with Shutter
SIP22N Series
SIP22N Series faceplates with shutters are ideal for the installation of keystone jacks, data, voice and A/V connectors.
-
Half-Gang / Single-Gang Module Icon Ring
SIP22N Series
SIP22N Series icon rings use only for SIP22N series modules.
-
Single-Gang Back Box
625MB12 Series
625MB12 series back box is designed to mount into a wall, floor or other flat surface. Convenient “molded-in” rear and side cable entries easily accommodate coax or optical fiber. Unit includes screws and double-sided tape for mounting, rubber-door and cable tie.
-
Single-Gang Faceplate
B49 Series
B49 series faceplates combine aesthetics and ease of use in work area installations. The faceplates are available in single gang and can accept up to 6 CLIPSAL aperture compatible keystone jacks. The faceplates can be attached to standard electrical boxes or wall-mounting hardware for flush-mount installations.
-
Single-Gang Faceplate
200N Series
200N series faceplates are ideal for the installation of keystone jacks, available in 1-, 2- and 3-port or blank. Insert the units into plastic inserts before snap in the faceplates.
-
Keystone Jack Module Insert
200 Series
200 series module inserts are ideal for the installation of keystone jacks, available in 1- and 2-port or blank. Insert the units into plastic inserts before snap in the faceplates.
-
Compact Port Mapping Cable Tester
CT055A
Extreme compact RJ45 network cable tester. Lightweight, easy to carry, and cost-saving. Fundamental pair-to-pair and grounding continuity tests solve over 90% of cable wiring problems, e.g., short, open circuits, and miswiring. Substantial port mapping and unique resistance measurement further offer value-adding functions which only offered by top-end testers on the market. Product includes: Tester main unit x 1 (AA battery sold separately) Remote plug x 1 Port mapping plugs #1-8 x 1 set
-
Compact Port Mapping Cable Tester
CT055B
Extreme compact RJ45 network cable tester. Lightweight, easy to carry, and cost-saving. Fundamental pair-to-pair and grounding continuity tests solve over 90% of cable wiring problems, e.g., short, open circuits, and miswiring. Substantial port mapping and unique resistance measurement further offer value-adding functions which only offered by top-end testers on the market. A coupler and an additional patch cable are included in aid of detecting ports that have an RJ-45 plug (MPTL for instance) at the remote end. Product includes: Tester main unit x 1 (AA battery sold separately) Remote plug x 1 Port mapping plugs #1-8 x 1 set Female to female shielded RJ-45 coupler x 1 Shielded patch cord x 1
-
↑Crimp
007A8H
Crimp 8P(RJ45) non pass-through modular plugs with 007A8H designed for precision. Comes with integrated cable stripper and cutter for cable preparation, compatible with cable outer diameter (O.D.) from Ø5.5 to Ø7.0. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
↑Crimp
007A8H03
Crimp 4P/6P/8P/DEC modular plugs using our All-in-One Modular Plug Crimper designed for precision crimp. Easily switch between voice/data plugs and prepare your cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.) from Ø5.0 to Ø8.0. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
↑Crimp/Thru
007A8M01
Crimp and trim 8P(RJ45)/6P(RJ12, RJ11) pass-through/non pass-through modular plugs, crimp strain latch, and wrap ground collars onto cable with a single tool. The 360° ground crimp in dual cavities provides secure and effective crimping for cable O.D. ranging from Ø6.5 to Ø8.5. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
↑Crimp/Palm
007A8H04
Crimp 8P(RJ45) non pass-through modular plugs with this palm-size plug crimping tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.). The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
↑Crimp/Palm/Thru
007A8H05
Crimp and trim 8P(RJ45) pass-through/non pass-through modular plugs with this palm-size plug crimping tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.). The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
↑Crimp/Stapler/Thru
007A8M02
Crimp and trim 8P(RJ45)/6P(RJ12, RJ11) pass-through/non pass-through modular plugs with strain latch using this compact crimper in stapler style. Comes with integrated cable stripper and cutter for cable preparation.
-
←Crimp
007A8H06
Crimp 8P(RJ45) non pass-through modular plugs, crimp strain latch (or not), and wrap ground collars onto cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.).
-
←Crimp/Thru
007A8H07
Crimp and trim 8P(RJ45) pass-through/non pass-through modular plugs, crimp strain latch (or not), and wrap ground collars onto cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.).
-
←Crimp/Lightweight
007A8H02
Crimp 6P/8P modular plugs using our All-in-One Plug Crimper designed in lightweight and compact size. Comes with integrated cable stripper and cutter for cable preparation, compatible with cable outer diameter (O.D.) from Ø5.0 to Ø7.0.
-
For 110 IDC
3013AMT110H
The Impact Punch Down Tool efficiently terminates keystones and patch panels using its removable 110 and 88 type blades. It seats wires securely into terminal blocks and trims excess length in one go. An adjustable impact setting adapts to terminating various cable gauges.
-
Data
3013ACSH01
Effortlessly strip UTP/STP twisted pair cables with one hand using our intuitively designed Twisted Pair Lightweight Cable Stripper. It accommodates a broad range of Cable O.D. (∅3.5~∅9mm) without requiring any adjustments. Designed to prevent nicks to the insulated conductors during the stripping process.
-
Adjustable Data
3013ACSH02
Effortlessly strip and cut UTP/STP twisted pair cables or multi-conductor wires with just one hand using our Twisted Pair Adjustable Cable Stripper with Cutter designed for precision. It handles a wide range of Cable O.D. (∅3.5~∅9mm) with an adjustable cutting depth for accuracy. The incorporated bouncy controller (the red part) serves as a protection to prevent nicks to the insulated conductors during the stripping process.
- Home Homepage
- This is HCI Company Profile
- Products Data Connectivity
-
Solutions Transmission Category
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- In the Know Download Catalog
- Contact Us Send us an inquiry