-
↑Crimp/Thru
007A8502
Crimp and trim 8P(RJ45) pass-through/non pass-through modular plugs, crimp strain latch (or not), and wrap ground collars onto cable with a single tool. The 360° ground crimp in dual cavities provides secure and effective crimping for cable O.D. ranging from Ø6.5 to Ø8.5. The horizontal crimping design provides a consistently flat force, minimizing uneven pressure or distortion for high-quality and consistent termination. Its stable and straightforward crimping motion ensures precise termination.
-
←Crimp
007A8H06
Crimp 8P(RJ45) non pass-through modular plugs, crimp strain latch (or not), and wrap ground collars onto cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.).
-
←Crimp/Thru
007A8H07
Crimp and trim 8P(RJ45) pass-through/non pass-through modular plugs, crimp strain latch (or not), and wrap ground collars onto cable with a single tool. Comes with integrated cable stripper and cutter for cable preparation, compatible with a wide range of cable outer diameter (O.D.).
-
EZ Untwist
3013ACSH04
Untwist and straighten wires(insulated conductors) without strain with this convenient cable separation tool. Comes with 2 slots(1.2mm/1.8mm) for twisted pair from 0.8mm to 1.8mm.
-
Category 6A
SP48KMCA6AM
48-port in 1U saves precious rack space in Data Center. The Build-in wire management provides strain-relief for great support of 48pcs Cat 6A UTP cable bundles (a lot of loads!). ANSI/TIA-568.2-D Cat 6A channel performance supports all kinds of inter-connection or cross-connection you may possibly encounter on the sites. The PCBA inside the modules are covered by patent US 9391405 B1. This patent discloses a methodology to minimize the disturbance caused by Feed-Through connection. Made in Taiwan 4PPoE Compliant US 9391405 B1 Patented
-
Category 6
SP48KMCA6SM
48-port in 1U saves precious rack space. The Build-in wire management provides strain-relief for great support of cable bundles. ANSI/TIA-568.2-D Super Cat 6 channel performance supports all kinds of inter-connection or cross-connection you may possibly encounter on the sites. The PCBA inside the modules are covered by patent US 9391405 B1. This patent discloses a methodology to minimize the disturbance caused by Feed-Through connection. Made in Taiwan 4PPoE Compliant US 9391405 B1 Patented
-
Cat 6A STP Field Termination Plug
88TSK01 Series
ISO/IEC Cat 6A STP PoE++ Field Termination Plug 88TSK016AI is a part of Next-generation twisted-pair cabling specifications, it offers the bandwidth of Category 6A cabling. It also supports 25GBASE-T / 40GBASE-T applications for short distances, placing the focus on data center links, such as switch-to-server connections. ISO/IEC Cat 6A STP PoE++ Field Termination Plug 88TSK016AI is suitable for the PoE plus (IEEE 802.3at) applications, and its unique design provide More quickly and easy installation experience. Made in Taiwan, U.S. TAA Compliant
-
With Strain Relief
88TS52G6ATKBT
The 88TS52G6ATKBT is part of the 88TS52G product family and serves as the flagship model in the series. It features a standard body length that offers a generous grounding area of approximately 10mm. The regular length of the plug body provides an adequate buffer that helps maintain a proper bending radius when installed with cables routed through the ceiling or wall. This ensures good strain relief and promotes a reliable connection when connected to PoE built-in equipment. The proper bending radius and strain relief contribute to the overall stability of the connection, enhancing the reliability of the network infrastructure. The 88TS52G6ATKBT plug excels in performance, demonstrating exceptional results in both Cat 6A Modular Plug Terminated Link (MPTL) and even the more demanding Cat 6A Patch Cord Test Limit, surpassing the required standards with a significant margin. The plug is fully compatible with the IEEE 802.3bt 4PPoE (Power over Ethernet) requirement. It has the capability to efficiently deliver 90W of power from the Power Sourcing Equipment (PSE) to the Powered Device (PD), meeting the power delivery standards mandated by PoE Type 4. At the PD end, it ensures the reception of 71.3W of power, ensuring reliable and consistent power supply for PoE Type 4 devices.
-
Boot for Plug 88S400E0GC52
Suitable Cable Range: 5.0/5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.0mm/5.5mm/6.0mm/6.5mm cable O.D. for options
-
For 88U400F12C52 For 88U40250AC52
Suitable Cable Range: 4.0/4.5/5.0/5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
For 88U502I0AD52 For 88U50H10ED52
Suitable Cable Range: 4.5/5.2/6.0/6.5mm
Designed for ease of use in fully populated blade switches or high-density patch panels, the embedded boot features a slender body that seamlessly aligns with the width of the modular plug. This ensures there is no interference between neighboring ports. By fully inserting the two clips into the modular plug, the boot significantly enhances cable strain relief. Additionally, the boot is crafted from Polycarbonate (PC), a material known for its durability and resilience. The transparent housing eliminates the need for color matching cables, offering a universal fit with one boot for all. - PC UL94V-2 rated - 4.5/5.2/6.0/6.5mm O.D. for options
-
Boot for Plug 88U400A0EC52
Suitable Cable Range: 5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.5mm/6.0mm/6.5mm cable O.D. for options
-
Boot for Plug 88U401H0FC52
Suitable Cable Range: 4.0/4.5/5.0/5.5/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
Boot for Plug 88S40170JB52
Suitable Cable Range: 5.0/5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.0mm/5.5mm/6.0mm/6.5mm cable O.D. for options
-
Slim Boot (Embedded Type)
w/SR for 4.0mm/4.5mm cable entrance
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
Boot for Plug 88S50H90AD52
Suitable Cable Range: 4.5/5.2/6.0/6.5mm
Designed for ease of use in fully populated blade switches or high-density patch panels, the embedded boot features a slender body that seamlessly aligns with the width of the modular plug. This ensures there is no interference between neighboring ports. By fully inserting the two clips into the modular plug, the boot significantly enhances cable strain relief. Additionally, the boot is crafted from Polycarbonate (PC), a material known for its durability and resilience. The transparent housing eliminates the need for color matching cables, offering a universal fit with one boot for all. - PC UL94V-2 rated - 4.5/5.2/6.0/6.5mm O.D. for options
-
Boot for Plug 88S40370EC52
Suitable Cable Range: 4.0/4.5/5.0/5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
Slim Boot (Embedded Type)
Suitable Cable Range: 5.0/5.5/6.0/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 5.0mm/5.5mm/6.0mm/6.5mm cable O.D. for options
-
Slim Boot (Embedded Type)
Suitable Cable Range: 4.0/4.5/5.0/5.5/6.5mm
The embedded boot provides the convenience when being used in fully populated blade switches or high density patch panels. The slender body is flush fit with the modular plug's width. There will be no interference between neighboring ports. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. One boot fits all. - PC UL94V-2 rated - 4.0mm/5.0mm 5.5mm/6.0mm/6.5mm cable O.D. for options
-
Snagless Boot (Embedded Type)
Regular Length, 6.0φ and 6.5φ for Options
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. A single boot fits all.
-
Snagless Boot (Embedded Type)
Short Body, 4.7φ and 6.5φ for Options
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. Comparing to regular snagless boot P/N. SR511E02, this short snagless boot further enables cable-bending in a relatively narrower space. The transparent housing saves you from matching the colors of cables. One single boot fits all.
-
Outer Coated Type
Φ5.5 to 6.5mm
The outer coated boots are made for reducing the cable strain when using solid cables with a diameter of approximately 6.0+-0.5mm. The boot is made of PVC, which elastically guards the cable and plug connection. The interdigit cone tail protects against improper bending that might result in signal reflections and intermittence of networks.
-
For Snagless Plug
Regular
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. The transparent housing saves you from matching the colors of cables. A single boot fits all.
-
For Snagless Plug
Short
When employed in fully populated blade switches or high-density patch panels, the embedded boot offers ease. The slender body is flush fit with the modular plug's width. There won't be any port conflicts as a result. The two clips can be fully inserted into the modular plug which enhances the relief of cable strain. Additionally, the boot is made of Polycarbonate (PC), which is both durable and resilient. Comparing to regular snagless boot P/N. SR511E02, this short snagless boot further enables cable-bending in a relatively narrower space. The transparent housing saves you from matching the colors of cables. One single boot fits all.
- Home Homepage
- This is HCI Company Profile
- Products Data Connectivity
-
Solutions Transmission Category
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- In the Know Download Catalog
- Contact Us Send us an inquiry