-
Waterproof Assembly Kit for Outdoor Cable
IEAD
The Industrial Ethernet Series provide you a solution to support multiple applications, such as military networking, pharmaceutical laboratories or some units that are supposed to work under harsh environments where exposure to liquid or dust would likely occur.
-
Category 6A
3013AQA3D6A
RJ45 90 degree Unshielded Keystone jack (QA3 Series) is designed to easily snap in and out of the wall outlet, patch panel and surface mount box. It is individually terminated using Insulation Displacement Connectors (IDC) with punch down tool for quick installation. Fully automatic press-fit production of PCB assembly to ensure consistency quality and complies with international standards up to 10GHz. UTP Cat 6A keystone jack (QA3 Series) comes with T568A/T568B color label and fully complies with connecting hardware transmission performance of edition 2.2 of ISO/IEC 11801, CENELEC 50173-1, and ANSI-TIA-568.2-D for Return loss, Insertion loss, NEXT loss, FEXT loss, TCL, and TCTL up to 500MHz. The unique structure provides an efficient and effective method of reducing alien crosstalk from neighboring connectors.
-
Cat 8.1 STP Field Termination Plug
88TS52GA8TK
The 88TS52GA8TK series is equipped with larger Cat 8 S/FTP 22AWG cable receptacle. This design feature on wire organizor allows for convenient routing of each insulated conductor through its dedicated slot, ensuring effortless seating and installation. The Cat 8.1 PCBA is specifically designed for assembly at both ends of a Cat 8 patch cable, with the total combined length extending from the Permanent Link being less than 6 meters. This configuration enables the completion of the standard-specified channel of less than 30 meters. It enables the successful establishment of a ANSI/TIA-568.2-D Cat 8.1 standard-specified channel of less than 30 meters, supporting 25GBASE-T and 40GBASE-T transmission over copper cabling. In regards to cable routing flexibility, the plug incorporates a free-directional cable entrance that seamlessly adjusts to accommodate the incoming cable. Whether the cable is routed from the top or the sides, you have the versatility to customize the cable patch by securely closing the two-piece guiding lids and rotating them as necessary. This feature ensures convenient and adaptable cable management for various installation scenarios.
-
For 0.55-0.60mm Insulated Conductor
w/SR for 4.0mm cable entrance
The “Small Conductor” Cat 6A unshielded modular plugs accept 28AWG and 30AWG ultra-slim cables. 30AWG cable has nominal insulations at approximately 0.53mm only. The 2-piece design has a “loading-bar” to accept from 0.55 to 0.60mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. 3-prong blades further enhance the certainty of piercing the ultra-slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades
-
For 1.00-1.10mm Insulated Conductor
“2pcs”, 6-up/2-down loading bar
The “Big Conductor” Cat 6A unshielded modular plugs accept from 23 to 26AWG, U/UTP solid or stranded twisted pair cable with accommodation of insulated conductor from 1.00mm to 1.10mm. The 2-piece design has a “loading-bar” to accept from 1.00 to 1.10mm insulated conductors so all the wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
-
For 0.95-1.05mm Insulated Conductor
“2pcs”, 6-up/2-down loading bar
The Snagless Cat 6A shielded modular plugs accept from 24AWG to 26AWG stranded shielded twisted pair cable with accommodation of insulated conductor from 0.95mm to 1.05mm. 2-piece design. The loading bar is made in two rows - “6-up/2-down”. It facilitates moving the green pair away from the other pairs. The most impedance-mismatched pair is put away so as to moderate the noises done to the other pairs. Each wire is trimmed flush and steadily seated. Plug assembly that surpasses the Cat 6A specification is therefore feasible. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades - Supports PoE type 4 (PoE++) application
-
For 0.55-0.60mm Insulated Conductor
w/SR for 4.0mm cable entrance
The “Small Conductor” Cat 6A shielded modular plugs accept 28AWG and 30AWG ultra-slim cables. 30AWG cable has nominal insulations at approximately 0.53mm only. The 2-piece design has a “loading-bar” to accept from 0.55 to 0.60mm insulated conductors so all the thin wires can be placed on each slot. And the loading-bar is made in two rows - “6-up/2-down”, moving the green pair away from the other pairs. Plug assembly that surpasses the Cat 6A specification is therefore feasible. 3-prong blades further enhance the certainty of piercing the ultra-slim cable so excellent conductivity can be assured. - UL Listed, TIA-1096 and IEC 60603-7 compliant - PC UL94V-2 rated plug housing, 50u” gold plated contact blades
- Home Homepage
- This is HCI Company Profile
- Products Data Connectivity
-
Solutions Transmission Category
- UTP - ISO Cat 6a Component-Rated
- STP - ISO Cat 6a Component-Rated
- UTP - ISO-11801 Class Ea Cabling
- STP - ISO-11801 Class Ea Cabling
- UTP - TIA Cat 6A Component-Rated
- STP - TIA Cat 6A Component-Rated
- UTP - TIA Cat 6A Cabling Solution
- STP - TIA Cat 6A Cabling Solution
- UTP - Super Cat 6 Component-Rated
- STP - Super Cat 6 Component-Rated
- UTP - Super Cat 6 Cabling Solution
- STP - Super Cat 6 Cabling Solution
- In the Know Download Catalog
- Contact Us Send us an inquiry