|
|
LSA+ CONNECTION STSTEM |
|
LSA+ connection system can be used throughout the
local loop, in main distribution frames, cross-connection
cabinets, distribution points and in-house
areas. The contact security is especially noteworthy without
worrying about climatic and other environmental problems.
Technical contact security results in the formation of a
gas-tight connection with very low transmission resistance.
Connection is made through the special termination tool,
which means the quality of the connection is always
repeatable.
¡@ |
|
|
|
PLUS TYPE |
|
Connection modules have 1-piece type contact which providing
a continuous link between jumper wiring and permanent
wiring, giving provision for monitoring access and over
voltage protection. |
| ¡@ |
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KCMS08-ABS |
8-pair.ABS. |
L103.0 x W21.3 x H39.5 |
|
HC-KCMS08-PBT |
8-pair.PBT. |
L103.0 x W21.3 x H39.5 |
|
HC-KCMS10-ABS |
10-pair.ABS. |
L123.0 x W21.3 x H39.5 |
|
HC-KCMS10-PBT |
10-pair.PBT. |
L123.0x W21.3 x H39.5 |
|
|
|
 |
|
PROFIL TYPE
|
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KCML10-PBT |
10-pair.PBT. |
L122.0 x W22.6 x
H40.6 |
|
HC-KCML10E-PBT |
10-pair W/Earth Clip, PBT. |
L122.0 x W22.6 x
H40.6 |
|
|
|
PLUS TYPE |
 ¡@ |
DISCONNECTION MODULES
Disconnection modules have 2-piece type contacts that closed
normally. This gives all the features as connection modules
plus the advantage of individual pair disconnection and
4-wire test access. |
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KDMS08-ABS |
8-pair.ABS. |
L103.0 x W21.3 x H39.5 |
|
HC-KDMS08-PBT |
8-pair.PBT. |
L103.0 x W21.3 x H39.5 |
|
HC-KDMS10-ABS |
10-pair.ABS. |
L123.2 x W21.3 x H39.5 |
|
HC-KDMS10-PBT |
10-pair.PBT. |
L123.2 x W21.3 x H39.5 |
|
|
|
 |
|
PROFIL TYPE
|
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KDML10-PBT |
10-pair, PBT. |
L122.0 x W22.6 x H40.6 |
|
HC-KDML10E-PBT |
10-pair W/Earth Clip, PBT. |
L122.0 x W22.6 x H40.6 |
|
|
|
DISTRIBUTION BOXes |
|
Distribution boxes come with back mount frame normally. |
|
 |
|
MINI TYPE |
|
Wall mount mini distribution boxes with up to 30-pair
modules and cover. |
|
MINI TYPE
Wall mount mini distribution boxes with up to 30-pair
modules and cover. |
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KDB-M10/DA |
10-pair Distribution Box W/Disconnection Module, ABS. |
L165.0 x W85 x H35 |
|
HC-KD8-M30 |
30-pair Distribution Box, ABS. |
L150.0 x W105 x H56 |
|
*Note: Boxes are sold empty. PLUS type
modules must be ordered separated. |
|
|
|
 |
|
REGULAR TYPE |
|
These boxes are designed for surface and flush mounting. |
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KDB-RS030 |
Distribution Box, Screw Lock. |
L162 x W163 x H76 |
|
HC-KDB-RS050 |
Distribution Box, Screw Lock. |
L190 x W250 x H140 |
|
HC-KDB-RS100 |
Distribution Box, Screw Lock. |
L240 x W165 x H95 |
|
HC-KDB-RK030 |
Distribution Box, Key Lock. |
L162 x W163 x H76 |
|
HC-KDB-RK050 |
Distribution Box, Key Lock. |
L190 x W250 x H140 |
|
HC-KDB-RK100 |
Distribution Box, Key Lock. |
L280 x W206 x H113 |
|
HC-KDB-RC030 |
Distribution Box, Coin Lock. |
L171 x W140 x H75 |
|
HC-KDB-RC050 |
Distribution Box, Coin Lock. |
L209 x W209 x H75 |
|
HC-KDB-RC100 |
Distribution Box, Coin Lock. |
L320 x W215 x H75 |
|
*Note: Boxes are sold empty. PLUS type modules must be
ordered separated. |
|
|
|
 |
|
OUTDOOR TYPE |
|
The
boxes made of highly
impact resistant polypropylene (PP). |
|
Ordering Information |
|
Part No.
|
Pair |
Description |
Dimension (mm) |
|
HC-KDB-OS008 |
8 |
Distribution Box, Screw Lock. |
L160 x W115 x H85 |
|
HC-KDB-OS010 |
10 |
Distribution Box, Screw Lock. |
L160 x W115 x H85 |
|
HC-KDB-OS030 |
30 |
Distribution Box, Screw Lock. |
L185 x W135 x H80 |
|
HC-KDB-OS050 |
50 |
Distribution Box, Screw Lock. |
L195 x W195 x H85 |
|
HC-KDB-OS100 |
100 |
Distribution Box, Screw Lock. |
L350 x W190 x H95 |
|
*Note: Boxes are sold empty. PLUS type modules must be
ordered separated. |
|
|
|
MOUNTING FRAMES |
|
The mounting frame is made by stainless steel. |
|
 |
|
FOR 8-PAIR MODULES |
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KMF808 |
8-Pair. |
L22.5 x W85 x H52 |
|
HC-KMF816 |
16-Pair. |
L45 x W85 x H52 |
|
HC-KMF824 |
24-Pair. |
L67.5 x W85 x H52 |
|
HC-KMF840 |
40-Pair. |
L112.5 x W85 x H52 |
|
HC-KMF880 |
80-Pair. |
L225 x W85 x H52 |
|
HC-KMF088 |
88-Pair. |
L247.5 x W85 x H52 |
|
|
|
FOR 10-PAIR MODULES
|
|
Ordering Information |
|
Part No. |
Description |
Dimension (mm) |
|
HC-KMF010 |
10-Pair. |
L22.5 x W105 x H50 |
|
HC-KMF020 |
20-Pair. |
L45 x W105 x H50 |
|
HC-KMF030 |
30-Pair. |
L67.5 x W105 x H50 |
|
HC-KMF050 |
50-Pair. |
L112.5 x W105 x H50 |
|
HC-KMF060 |
60-Pair. |
L135 x W105 x H50 |
|
HC-KMF080 |
80-Pair. |
L180 x W105 x H50 |
|
HC-KMF100 |
100-Pair. |
L225 x W105 x H50 |
|
HC-KMF110 |
110-Pair. |
L225 x W105 x H50 |
|
HC-KMF160 |
160-Pair. |
L360 x W105 x H70 |
|
HC-KMF210 |
210-Pair. |
L472.5 x W105 x H70 |
|
HC-KMF310 |
310-Pair. |
L697.5 x W105 x H70 |
|
*Note: Boxes are sold empty. PLUS type modules must be
ordered separated. |
|
|
|
JUMPERABLE FRAMES |
|
Jumperable frames for
mounting of 10-pair modules internal use as a campus
distributor, building distributor, or floor distributor at
the network boundary. |
|
 |
|
BACK MOUNT TYPE |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KJF100 |
100-Pair. |
|
HC-KJF110 |
110-Pair. |
|
HC-KJF160 |
160-Pair. |
|
HC-KJF210 |
210-Pair. |
|
HC-KJF310 |
310-Pair. |
|
*Note: Boxes are sold empty. PLUS type modules must be
ordered separated. |
|
|
|
 |
|
ROD
MOUNT TYPE |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KJB100 |
100-Pair. |
|
HC-KJB250 |
250-Pair. |
|
*Note: Boxes are sold empty. PLUS type modules must be
ordered separated. |
|
|
|
 |
|
SURGE ARRESTORS |
|
Used for overvoltage protection magazine. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KGA3-230 |
3-pole 230V. |
|
HC-KGA3-230F |
3-pole 230V W/Fail Safe. |
|
HC-KGA3-350 |
3-pole 350V. |
|
HC-KGA3-350F |
3-pole 350V W/Fail Safe. |
|
|
|
 |
|
ARRESTOR MAGAZINES |
|
The arrestor magazines hold up to ten 3-pole arrestors for
surge protection of modules mounted on a back mount frame.
|
|
Ordering Information |
|
Part No. |
Description |
|
HC-KPM10 |
10-pair, Unloaded. |
|
HC-KPM10/A3-230 |
10-pair, Loaded W/3-pole 230V. |
|
HC-KPM10/A3-230F |
10-pair, Loaded W/Fail Safe 3-pole 230V. |
|
HC-KPM10/A3-350 |
10-pair, Loaded W/3-pole 350V. |
|
HC-KPM10/A3-350F |
10-pair, Loaded W/Fail Safe 3-pole 350V. |
|
|
|
 |
|
PROTECTION PLUG |
|
Used with earth bar for overvoltage protection. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KLP-01 |
Compact 1-Pair 5-Point Overvoltage Lighting Protector. |
|
|
 |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KLP02 |
1-Pair 5-Point Overvoltage Lighting Protector. |
|
|
|
 |
|
EARTH BAR |
|
Earth connection for 1-pair protection plugs between the
distribution frame and the protection plugs. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KEB10A |
10-pair. |
|
|
|
 |
|
DISCONNECTION PLUG |
|
Plug for disconnecting a circuit. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KDP01 |
Disconnection Plug. |
|
|
|
 |
|
TERMINATION TOOL |
|
The termination tool installs LSA+ module in your networking
systems. The tool design includes termination, stripping &
cutting.
|
|
Ordering Information |
|
Part No. |
Description |
|
HC-KTL002 |
Insertion Tool for LSA+ Module Terminates & cuts. |
|
|
|
VOICE PATCH PANELS |
|
FEATURES
|
|
- High density Cat.3 voice patch panel.
- 19" panel w/cable tie cutout to manage each different
cable.
- Available for 25 &
50-port RJ45 in 1U, cost
effective.
- 110 or LSA+ compatible ID. |
|
 |
|
Ordering Information |
|
Part No. |
Description |
Height |
|
HC-BP25-8-C3 |
25-Port Cat.3 Unshielded Patch Panel, 5-in-1, 110 IDC. |
1U |
|
HC-BP50-8-C3 |
50-Port Cat.3 Unshielded Patch Panel, 10-in-1, 110 IDC. |
1U |
|
HC-BP25-K8-C3 |
25-Port Cat.3 Unshielded Patch Panel, 5-in-1, LSA+ IDC. |
1U |
|
HC-BP50-K8-C3 |
50-Port Cat.3 Unshielded Patch Panel, 10-in-1, LSA+ IDC. |
1U |
|
HC-BP25-B8-C3 |
25-Port Cat.3 Unshielded Patch Panel, 5-in-1, KATT IDC. |
1U |
|
HC-BP50-B8-C3 |
50-Port Cat.3 Unshielded Patch Panel, 10-in-1, KATT IDC. |
1U |
|
|
|
 |
|
PATCH CORDS |
|
Patch cord fitted with LSA plug and 6P U.S. modular plug.
Idea for connects telephone patch panels. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KTC1TP-01 |
2-Pole LSA+ Plug To RJ11 (6P2C) Plug Cord, L=1m. |
|
HC-KTC2TP-01 |
4-Pole LSA+ Plug To RJ14 (6P4C) Plug Cord, L=1m. |
|
|
|
 |
|
TEST CORDS |
|
Test cord fitted with test plug and 6P U.S. modular plug or
alligator clip. Idea for connects the test equipment to MDF
or IDF. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-KTC1TA-01 |
2-Pole LSA+ Plug To Alligator Clip Cord, L=1m. |
|
HC-KTC2TA-01 |
4-Pole LSA+ Plug To Alligator Clip Cord, L=1m. |
|
|
