|
ˇ@ |
|
ISDN ACCESSORIES
Integrated Services Digital Network (ISDN) is a type of circuit
switched telephone network system, designed to allow digital
transmission of voice and data over ordinary telephone copper
wires, resulting in better quality and higher speeds than
available with analog systems. More broadly, ISDN is a set of
protocols for establishing and breaking circuit switched
connections, and for advanced call features for the user. |
| ˇ@ |
FEATURES
- Designed for ISDN S-BUS services.
- Uses 100 W, 1/4 W resistor.
- 4-pair, 8-Position plug: active pin 3/6 and 4/5. |
 |
| ˇ@ |
|
TERMINATOR |
|
Ordering Information |
|
Part No. |
Description |
|
HC-ISDN-T |
ISDN Terminator. |
|
|
| T-TYPE ADAPTERS |
 |
|
T-TYPE
(Unshielded) |
|
Ordering Information |
|
Part No. |
Description |
|
HC-202D-8-T-U1 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 1&2 To Jack 1, Pair 3&4 To Jack 2
For 10BASE-T Applications At Either Jack |
|
HC-202D-8-T-U2 |
Splits A 4-Pair USOC Wiring into:
Pair 1&2 To Jack 2, Pair 3&4 To Jack 1
For 4Mbps Token Ring Or Voice Applications At Either
Jack |
|
HC-202D-8-T-U3 |
Splits A 4-Pair T568A Wiring into:
Pair 1&4 To Jack 2, Pair 2&3 To Jack 1
For 4Mbps Token Ring Or Voice Applications At Either
Jack |
|
HC-202D-8-T-U4 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 1&2 To Jack 1, Pair 3&4 To Jack 2
For 10BASE-T At Jack 1 And Token Ring Or Voice
Applications At Jack 2 |
|
HC-202D-8-T-U5 |
Splits A 4-Pair T568B Wiring into:
Pair 1&3 To Jack 1, Pair 2&4 To Jack 2
For 4Mbps Token Ring Or Voice Applications At Either
Jack |
|
HC-202D-8-T-U6 |
Splits A 4-Pair T568B Wiring into:
Pair 1,2&3 To Jack 1, Pair 4 To Jack 2
For 3-Pair Voice At Jack 1 And 1-Pair Voice/Modem At
Jack 2 |
|
HC-202D-8-T-U7 |
Bridges All Jack Pairs. Compatible With Any Jack
Wiring. Provides An Additional 4-Pair Jack With The
Same Wiring |
|
HC-202D-8-T-U8 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 1&2 To Jack 1, Pair 3&4 To Jack 2
For 10BASE-T Applications At Either Jack |
|
HC-202D-8-T-U9 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 1&2 To Jack 1, Pair 3&4 To Jack 2
For 10BASE-T At Jack 1 And Voice Applications At Jack 2 |
|
HC-202D-8-T-U10 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 1&2 To Jack 1, Pair 3&4 To Jack 2
For 10BASE-T Applications At Either Jack |
|
HC-202D-8-T-U11 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 3&4 To Jack 1, Pair 1&2 To Jack 2
For Voice Applications At Either Jack |
|
HC-202D-8-T-U12 |
Splits A 4-Pair T568A/T568B Wiring into:
Pair 3&6 To Jack 1, Pair 1&2 To Jack 2
For 10BASE-T Applications At Jack 2 And Voice
Applications At Jack 1 |
| ˇ@ |
*Shielded version is available. |
|
| ˇ@
 |
|
MULTI-MOD ADAPTERS |
|
The Multi Adapter is an in-line modular designed to work
with workstation equipment such as phones, answering
machines, faxes, personal computers, and printers. The
Multi adapter offers a variety of useful application. It
can convert jack styles or alter the wiring sequence of
a modular jack. |
|
|
SPECIFICATIONS
-
Current rating: 1.5 Amps
- DC resistance: 0.1 ohm maximum
- Plug insertion life: 750 cycles minimum
- Plug & Jack contact force: 100 grams
- Plug retention force: 30 lbs minimum
- Temperature: -40˘XF~150˘XF (-40˘XC~68˘XC)
- Housing: High impact flame retardant plastic, UL 94V-0
rated
- Contact wire: 50 µˇ¨ of gold over 100 µˇ¨ of Nickel |
|
Ordering Information |
|
Part No. |
Description |
|
HC-406-I-AU1 |
Input: Unshielded 8P8C plug W/Cable, output: 8P8C jack x
4, Wiring 1. |
|
HC-406-I-AU2 |
Input: Unshielded 8P8C plug W/Cable, output: 8P2C jack x
4, Wiring 2. |
|
HC-406-I-AS1 |
Input: Shielded 8P8C plug W/Cable,
output: 8P8C jack x 4, Wiring 1. |
|
HC-406-I-AS2 |
Input: Shielded 8P8C plug W/Cable,
output: 8P2C jack x 4, Wiring 2. |
|
HC-406-I-BU1 |
Input: Unshielded 8P8C jack,
output: 8P8C jack x 4, Wiring 1. |
|
HC-406-I-BU2 |
Input: Unshielded 8P8C jack,
output: 8P2C jack x 4, Wiring 2. |
|
HC-406-I-BS1 |
Input: Shielded 8P8C jack,
output: 8P8C jack x 4, Wiring 1. |
|
HC-406-I-BS2 |
Input: Shielded 8P8C jack,
output: 8P2C jack x 4, Wiring 2. |
|
| ˇ@ |
|
Wiring1 |
ˇ@ |
Wiring2 |
|
RJ45 Plug/Jack |
Jack1 |
Jack2 |
Jack3 |
Jack4 |
|
RJ45 Plug/Jack |
Jack1 |
Jack2 |
Jac3 |
Jack4 |
|
(UTP unshielded) |
|
|
|
|
|
(UTP unshielded) |
|
|
|
|
|
1 |
1 |
1 |
1 |
1 |
|
1 |
4 |
ˇ@ |
ˇ@ |
ˇ@ |
|
2 |
2 |
2 |
2 |
2 |
|
2 |
5 |
|
|
|
|
3 |
3 |
3 |
3 |
3 |
|
3 |
ˇ@ |
4 |
ˇ@ |
ˇ@ |
|
4 |
4 |
4 |
4 |
4 |
|
4 |
|
|
4 |
|
|
5 |
5 |
5 |
5 |
5 |
|
5 |
ˇ@ |
ˇ@ |
5 |
ˇ@ |
|
6 |
6 |
6 |
6 |
6 |
|
6 |
|
5 |
|
|
|
7 |
7 |
7 |
7 |
7 |
|
7 |
ˇ@ |
ˇ@ |
ˇ@ |
4 |
|
8 |
8 |
8 |
8 |
8 |
|
8 |
|
|
|
5 |
|
(STP shielded) |
ˇ@ |
ˇ@ |
ˇ@ |
ˇ@ |
|
(STP shielded) |
ˇ@ |
ˇ@ |
ˇ@ |
ˇ@ |
|
S |
S |
S |
S |
S |
|
S |
S |
S |
S |
S |
|
|
Unshielded
shielded |
|
T-MOD
TYPE |
|
Ordering Information |
|
Part No. |
Description |
|
HC-206-I-U1
HC-206-I-S1 |
Splits a 4-pair USOC jack, for Token Ring or voice applications at either jack. |
|
HC-206-I-U2
HC-206-I-S2 |
Splits a 4-pair T568B jack, for Token Ring or voice applications at either jack. |
|
HC-206-I-U3
HC-206-I-S3 |
Splits a 4-pair T568A jack, for Token Ring or voice applications at either jack. |
|
HC-206-I-U4
HC-206-I-S4 |
Splits a 4-pair T568A/T568B jack, for 10 BASE-T (jack 1) and Token Ring or voice applications (jack 2). |
|
HC-206-I-U5
HC-206-I-S5 |
Splits a 4-pair T568A/T568B jack, for 10 BASE-T applications at either jack. |
|
HC-206-I-U5
HC-206-I-S5 |
Splits a 4-pair T568B jack, for 1,2 or 3 pair voice (jack 1) and
1-pair voice/ modem (jack 2). |
|
HC-206-I-U5
HC-206-I-S5 |
Bridges all jack pairs. Compatible with any jack wiring. Provides an additional 4-pair jack with the same wiring. |
| ˇ@ |
ˇ@ |
|
|
|
ISDN-ACCESSORIES |
 |
|
EXTENSION
CORD |
|
The ISDN Extension Cord is consisting of a male (RJ11, RJ12, RJ45) connector to which connects a RJ45 (8P8C) socket through (2-pair, 3-Pair, 4-Pair) cables with resistor inside the socket. Accept customer's ordering for specific wiring. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-207-I |
ISDN Extension Cord. |
|
|
 |
|
EXTENSION
COUPLER |
The ISDN Extension Coupler is designed with two RJ45 (8P8C) sockets to which connects with P.C. Board.
The P.C. Board is designed with Pin 3-6 and Pin 4-5 for resistor fixed. |
|
Ordering Information |
|
Part No. |
Description |
|
HC-210-I |
ISDN Extension Coupler, Jack-to-Jack. |
|
|
|
